canon s330 woes

Archived from groups: comp.periphs.printers (More info?)

I would re-install the latest drivers.

--
Paul Woodsford
Remove NOSPAM to reply.
"Paul Heslop" <paul.heslop@blueyonder.co.uk> wrote in message
news:41DAE2BF.ECEEDFE3@blueyonder.co.uk...
I have a little Canon s330photo (winxp - usb) which I am more than
pleased
with, when it works. However, since a couple of months back it
occasionally goes a little scatterbrained. The black, and sometimes
the colour, will become lined or even kind of zig zagged. A great deal
of cleaning, replacing of cartridges is then done but it really does
seem to take forever to get it back on track and the ink monitor
usually hasn't mentioned any problems. Last time I spent hours doing
different stuff, removing the cartridges, making sure all was clean
and sparkling, and yet suddenly I was back to normal just as I was on
the point of giving up.

any ideas what's going on?
--
Paul (Whatever you've planned for me, I'm not the one)
------------------------------------------------------
Stop and Look
http://www.geocities.com/dreamst8me/

Archived from groups: comp.periphs.printers (More info?)

That's fine. Just re-install to ensure no other software installations have
caused problems.

That's the first thing I do and it often fixes the problems.

--
Paul Woodsford
Remove NOSPAM to reply.
"Paul Heslop" <paul.heslop@blueyonder.co.uk> wrote in message
news:41DED031.AB435470@blueyonder.co.uk...
> Paul Woodsford wrote:
>>
>> I would re-install the latest drivers.
>>
> I tried downloading what i thought were the latest but they appear to
> be the same ones
>
> --
> Paul (That's what keeps me down)
> ------------------------------------------------------
> Stop and Look
> http://www.geocities.com/dreamst8me/

Archived from groups: comp.periphs.printers (More info?)

Too true.

--
Paul Woodsford
Remove NOSPAM to reply.
"Paul Heslop" <paul.heslop@blueyonder.co.uk> wrote in message
news:41DEF72B.2D3FF9A5@blueyonder.co.uk...
> Paul Woodsford wrote:
>>
>> That's fine. Just re-install to ensure no other software installations
>> have
>> caused problems.
>>
>> That's the first thing I do and it often fixes the problems.
>>
>> --
> and it's a good point. This system was murder for the first few weeks
> after I got it, so anything could have happened
> --
> Paul (That's what keeps me down)
> ------------------------------------------------------
> Stop and Look
> http://www.geocities.com/dreamst8me/