Sign in with
Sign up | Sign in
Your question

question about command rate for memory

Last response: in Memory
Share
April 6, 2006 5:26:25 AM

k i have corsair xms 3200C2


what r the recommended latency's


i have it at 2.5 3.3.6 2t


my mobo is a Asus A8n-sli

with a 500 watt PSU
April 6, 2006 5:28:39 AM

Quote:
k i have corsair xms 3200C2


what r the recommended latency's


i have it at 2.5 3.3.6 2t


Depends if it's A64 or P4, but the impiment is the same.

Also pends on the integrity of the module/brand, but most can run 1T if it's 2 sticks on A64 and doesn't matter on P4, due to the A64 only handling 4 Ranks.

~~Mad Mod Mike, pimpin' the world 1 rig at a time
April 6, 2006 5:30:29 AM

i have an AMD

the memory is the Twinx1024

with a asus A8n-sli
Related resources
April 6, 2006 5:34:07 AM

Quote:
i have an AMD

the memory is the Twinx1024

with a asus A8n-sli


That board sucks, as I have it in an old 3000+ A64 * 3700+ X64 and it performs horribly.

Anyways, you should easily get 1T out of that, if you can't, something (or somebody) is an error.

~~Mad Mod Mike, pimpin' the world 1 rig at a time
April 6, 2006 5:38:00 AM

bahh

i know it aint the best

but it overclocks good

i got my 3200+ at 2.4ghz

i had to lower the ram to 133 to get it to 200 after overclock

but mehh i mostly play bf2 and it runs good


oh and one more thing , i have the E6 stepping <-- i dont know what that is

any help ?

but thx mike

=]
April 6, 2006 5:44:22 AM

Quote:
bahh

i know it aint the best

but it overclocks good

i got my 3200+ at 2.4ghz

i had to lower the ram to 133 to get it to 200 after overclock

but mehh i mostly play bf2 and it runs good


oh and one more thing , i have the E6 stepping <-- i dont know what that is

any help ?

but thx mike

=]


E6 means less volts, higher overclocks, but less temperature threshold.

~~Mad Mod Mike, pimpin' the world 1 rig at a time
April 6, 2006 5:46:37 AM

ok kool !
!