Kingston Hyper X @ 3-3-3-3

[Da_Banig]

Hi guys, I got Kingston Hyper X DDR2 533Mhz memory and I can configurate to run at 3-3-3-3. what do you guys thing about the timing?

 

[MadModMike]

Hi guys, I got Kingston Hyper X DDR2 533Mhz memory and I can configurate to run at 3-3-3-3. what do you guys thing about the timing?

How many volts and are you sure it's running @ 533 w/ 3-3-3-3 and maybe not the mobo putting it down to, say, 333?

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[Da_Banig]

Of course not. check it out its 3-3-3-3 Timing

http://valid.x86-secret.com/show_oc?id=86241

 

[MadModMike]

Of course not. check it out its 3-3-3-3 Timing

http://valid.x86-secret.com/show_oc?id=86241

That doesn't tell me how many volts.

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[Da_Banig]

I put volt as Auto on bios I did not change the value.

 

[MadModMike]

I put volt as Auto on bios I did not change the value.

Check BIOS as it should say the value. I am interested in seeing it's voltage level.


EDIT: Your RAM is rated for 3-3-3-10 @ 1.85v, which leads me to believe it's over 2v and if it isn't, it isn't stable.

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[Da_Banig]

Yo Mike, got a software to check it without going into the BIOS? I am feeling lazy and don't wanna restart...

 

[MadModMike]

Yo Mike, got a software to check it without going into the BIOS? I am feeling lazy and don't wanna restart...

ASUS has a product for their motherboards, AI Booster. IDK of many others that tell RAM Voltage.

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[Da_Banig]

Memory voltage is at v1.80 homie... and I have been playing games for a couple hours, no crash

 

[Da_Banig]

I just restarted my computer now my RAM is running @ 3-3-3-2

 

[MadModMike]

I just restarted my computer now my RAM is running @ 3-3-3-2

Hmm....3-3-3-10 @ 1.85v is the rated RAM speed...and you're telling me you get 3-3-3-2 @ 1.8v....hmmm......

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[Da_Banig]

THIS IS GOING INSANE, I recongurated to run @ 3-3-3-1 now :twisted:

http://jlovesc4ever.tripod.com/RamTiming.JPG

 

[Da_Banig]

Guys you have to copy and paste that link, the hyper link doesn't work. Man 3-3-3-1, NEVER SEEN IT

 

[Heyyou27]

Don't worry, he's probably wrong.

 

[MadModMike]

Guys you have to copy and paste that link, the hyper link doesn't work. Man 3-3-3-1, NEVER SEEN IT

Neither have I, and after looking at that picture, I still haven't seen it....Not with 1.8v, not to mention a RAS of 1 is nearly, if not totally, IMPOSSIBLE .

What next, RAS of 0? -1?

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[MasterLee]

Maybe he means 1T

 

[Heyyou27]

That would make a lot more sense.

 

[MadModMike]

That would make a lot more sense.

That CPU-Z shot shows his RAS @ 1, and CPU-Z verifies it @ 3 and I'd assume he could again @ 1, but that doesn't mean it's really at 1. There IS a definate mis-communication between CPU-Z and his Motherboard, because a RAS of 1 on DDR2 @ 266MHz w/ only 1.8v is impossible.

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[Da_Banig]

Well... I set it at 1 in the BIOS, and it didn't crash. But anyway I had fun with this sh!t gonna change it back to 3-3-3-5.

 

[Da_Banig]

And by the way, the timing is really 3-3-3-1-2T

 

[NumenorLord]

This is clearly an act of God.

 

[uber_g]

Jesus Walks

im tellin u man

 

[uber_g]

freakin ROFL

 

[Da_Banig]

I don't know how this sh!t happen lol but whatever it is, its just ownage. I couldn't believe that my RAM can actually run at those timing. Now I got my 2gig Corsair XMS, maybe it can run that low too!!!

 

[Da_Banig]

No joke, my Corsair XMS can do the job too... by the way that's a nice Jesus picture

copy and paste
http://jlovesc4ever.tripod.com/RamTiming2.JPG