3Dmark06 5670... ??

[MacD91]

I`m Not sure how good this is but looking at my set up, is this normal. I have not OC anything.Is there anything i can do,too to get this higher..? without spending too much.. :roll:

 

[MadModMike]

I`m Not sure how good this is but looking at my set up is this normal i have not OC anything .is there anything i can do too to get this higher..? without spending too much.. :roll:

I assume it's 3DMARK 06? If it's 06, that is normal score with that CPU (actually it's a bit under, but o well). If that's in 05, you got some SERIOUS issues my friend.

~~Mad Mod Mike, fixin' the world 1 rig at a time

 

[MacD91]

yeah... its 3DMARK06 had some driver problems before was not sure if everything was fixed now and looks Noramal. As i tried to play some of the games that came with the Gpu and they crashed my computer and never worked King Kong and snow blind. i,m a bit wairy of this pc as when i got it sent the first time if smoked my Mob and power supplie so i sent it back to the shop and they changes the Mob and Psu so this is me testing it out foir the first time since building it..

 

[MadModMike]

yeah... its 3DMARK06 had some driver problems before was not sure if everything was fixed now and looks Noramal. As i tried to play some of the games that came with the Gpu and they crashed my computer and never worked King Kong and snow blind. i,m a bit wairy of this pc as when i got it sent the first time if smoked my Mob and power supplie so i sent it back to the shop and they changes the Mob and Psu so this is me testing it out foir the first time since building it..

An x1900XTX can draw 20 Amps under full load, that accumulates to about 240 Watts of power, you must make sure you have a 30 Amp +12v RAIL on your PSU and at least 550 Watts.

~~Mad Mod Mike, pimpin' the world 1 rig at a time

 

[MacD91]

I Have Thermaltake Silent PurePower 680W ATX 12V 2.0 Plus EPS 2xPCI-E 4xSATA 10x4-Pin ...? is it good enough..??

 

[smedlin]

man why do people post these.

This same question has been asked here many times. People just don't like to "search".

As Mad Mike (and others) said, that for your rig, that an average score.

 

[Propain666]

I`m Not sure how good this is but looking at my set up, is this normal. I have not OC anything.Is there anything i can do,too to get this higher..? without spending too much.. :roll:

What test? 1024x768 No AA?


What is your Video Card settings at?



If I set my Image quality to best performance I can squeez out 7290 in 3DMARK06.

If I set my image quality to best quality I score a 7030-7120.

Both of those test are at 1024x768 with no AA.

 

[fainis]

i agree...what settings do you have .....?

 

[MacD91]

i don,t know were to look at my setting ..in bios..?? so i guess they are what they are when you buy it....

and my setting for the 3d benchmark test were 1280x1024

 

[MacD91]

what should my setting be to get it working better..? on bios and gpu settings..?

 

[trunks512]

wow thats a bad score
my 7800 gtx gets 5100 ish

 

[MacD91]

well i have been playing around with some of the bios and gpu setting s and i,m up to 6030 3Dmark06 at 1280x1024. I have OC my cpu by 10% (is that okay). and i let the catalyst look at my pc and make its own ajustments... !!

 

[Heyyou27]

6030 isn't too bad for a single card setup.

 

[fainis]

i agree .. default settings ...... are a good indicator of your performance that way you can compare it with others
set catalist to default , set forceware to default, set 3d mark to default ...

indeed ..but in my opinion 3dmarkxx is not necesary a performance indicator.....i use it ..for example ..for integrity check.....for example i run 3dmakxx in a loop for few hours .. i meansure the temperatures, etc
if the sistem is strong enough to run these tests for hours at different level of details ...it will be strong enough to run the desired games