Archived from groups: microsoft.public.win98.gen_discussion (
More info?)
Well, of course.
--
Gary S. Terhune
MS MVP Shell/User
http://www.grystmill.com/articles/cleanboot.htm
http://www.grystmill.com/articles/security.htm
<wa0goz@arrl.net> wrote in message news:422509FB.A22@arrl.net...
> This is only true if you leave the session open. If you close the
> session or close the disk, you can no longer write to the disk.
>
> Henry
>
>
> Gary S. Terhune wrote:
> >
> > Incorrect. CDR disks can be burned many times. Disks are burned in
> > "sessions", and you can burn multiple sessions to a disk. What you
have
> > to remember to do (in Roxio, anyway) is to import the existing
sessions
> > into the project before adding a new session. This retains the file
> > table. As you add another session, if a file or files are added that
are
> > the same file (and same path on the CD) as an existing file, the new
> > "table of contents" points to the new copy instead of the old.You
could
> > conceivably burn 80,000 copies of a 10KB file to a single CDR, and
only
> > one of them, the last one burned, would appear when you went to read
it.
> >
> > Using this "overwrite" ability (not overwriting the data but burning
a
> > new copy to available space and then updating the TOC) is much more
> > economical (CDRWs cost a lot more), and CDRW disks aren't all
they're
> > cracked up to be. If you're talking about saving several small files
> > several times, CDRs will do the job just fine.
> >
> > --
> > Gary S. Terhune
> > MS MVP Shell/User
> >
http://www.grystmill.com/articles/cleanboot.htm
> >
http://www.grystmill.com/articles/security.htm
> >
> > "Saga" <antiSpam@somewhere.com> wrote in message
> > news:uvO0YcpHFHA.1392@TK2MSFTNGP10.phx.gbl...
> > >
> > > Just to add to everyone else's remarks, and probably
> > > stating the obvious, but I'd rather be sure.
> > >
> > > A CD-RW drive is able to burn to CDR (with the bundled
> > > s/w others mentioned), but it is also able to burn to
> > > CDRW discs. The difference here is that CDRs can
> > > only be burned once. So after you save your work to
> > > a CDR, that's it! You can't erase it, you can rewrite it.
> > >
> > > If you are creating a backup with lots of data. this is
> > > acceptable behavior, but if you want the CD to just save
> > > the file you are working on, then a CDR disc is not the
> > > best way to go becasue, once you burn that file, that is all
> > > you can burn, and you can't reuse theCD in any way.
> > >
> > > The CDRW discs do allow you to rewrite data. So you
> > > can save your work today, then tomorrow you can
> > > erase the CDRW disc and once again copy the same
> > > data to it. It is usually a good idea to rottate 2 or more
> > > CDRW discs, so you'll always have at least one disc
> > > with your data.
> > >
> > > Good luck Sunshine!
> > > Saga
> > >
> > >
> > > "Sunshine" <sunshinenews2000-nwsgrps@yahoo.com> wrote in message
> > > news:uoh3AcgHFHA.2648@TK2MSFTNGP14.phx.gbl...
> > > >I am considering adding a CD-RW drive to my system. I have
Win98SE.
> > > >Will this allow me to save a file to a CD-R. I don't think
Win98SE
> > > >support MAPI.
> > > > Thanks
> > > >
> > >
> > >