If i insert a CD in the drive

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

Try Control panel -system applet - Highlight the DVD drive and click
properties.

Click the settings tab and make sure Auto Insert Notification is checked.

--
Jon Hildrum
DTS MVP
Jon_Hildrum@msn.com
www.hildrum.com
"Paolo" <paolotripi@aliceposta.it> wrote in message
news:ukMxfydMFHA.2136@TK2MSFTNGP14.phx.gbl...
> From some days if i insert a CD of software in the Lite-On LTR 48246S DVD
> drive it doesn't start automaticly as before and now i need always to
start
> it manually:
> I don't understand why is happen and how to solve it these strange
behavior
> of the drive.
> Thank you in advance for help
> Paolo
>
>

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

You're right. However, some burner software installations disabled this on
purpose for proper operation.
"Jon_Hildrum" <Jon_Hildrum@amsn.com> wrote in message
news Mn8L8fMFHA.1396@TK2MSFTNGP10.phx.gbl...
> Try Control panel -system applet - Highlight the DVD drive and click
> properties.
>
> Click the settings tab and make sure Auto Insert Notification is checked.
>
> --
> Jon Hildrum
> DTS MVP
> Jon_Hildrum@msn.com
> www.hildrum.com
> "Paolo" <paolotripi@aliceposta.it> wrote in message
> news:ukMxfydMFHA.2136@TK2MSFTNGP14.phx.gbl...
> > From some days if i insert a CD of software in the Lite-On LTR 48246S
DVD
> > drive it doesn't start automaticly as before and now i need always to
> start
> > it manually:
> > I don't understand why is happen and how to solve it these strange
> behavior
> > of the drive.
> > Thank you in advance for help
> > Paolo
> >
> >
>
>

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

That was true once upon a time, but AFAIK no remotely recent burning software does
that anymore. Nero (at least through version 5.5) used a .vxd driver file to *only*
disable the autoinsert notification while the Nero program was in use, effectively
overriding temporarily the enabled setting in Device Manager. I don't recall what
method Easy CD Creator used, but IIRC they did not disable autoinsert in DM, at
least not in the more recent versions. The fact that the OP refers to a DVD drive
indicates (hopefully) that the associated software is more recent. It would
certainly be helpful if they would post back with details such as what burning
softwares and versions are installed, if the problem persists after following Jon's
procedure. :-)
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/goodpost.htm

"Lil' Dave" <spamyourself@virus.net> wrote in message
news:%23$fxZegMFHA.3356@TK2MSFTNGP12.phx.gbl...
> You're right. However, some burner software installations disabled this on
> purpose for proper operation.
> "Jon_Hildrum" <Jon_Hildrum@amsn.com> wrote in message
> news Mn8L8fMFHA.1396@TK2MSFTNGP10.phx.gbl...
> > Try Control panel -system applet - Highlight the DVD drive and click
> > properties.
> >
> > Click the settings tab and make sure Auto Insert Notification is checked.
> >
> > --
> > Jon Hildrum
> > DTS MVP
> > Jon_Hildrum@msn.com
> > www.hildrum.com
> > "Paolo" <paolotripi@aliceposta.it> wrote in message
> > news:ukMxfydMFHA.2136@TK2MSFTNGP14.phx.gbl...
> > > From some days if i insert a CD of software in the Lite-On LTR 48246S
> DVD
> > > drive it doesn't start automaticly as before and now i need always to
> > start
> > > it manually:
> > > I don't understand why is happen and how to solve it these strange
> > behavior
> > > of the drive.
> > > Thank you in advance for help
> > > Paolo
> > >
> > >
> >
> >
>
>

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

Im sorry but i'm notfamiliar with english and specially with some acronym.
What do you means with AFAIK ?
I have in my computer installed Nero Burning version 5.5 and Easy CD-DA
Extractor version 8.0.1 (a tria version)
Thank you for help
Paolo


"glee" <glee29@spamindspring.com> ha scritto nel messaggio
news:%23dVciyhMFHA.3380@TK2MSFTNGP15.phx.gbl...
> That was true once upon a time, but AFAIK no remotely recent burning
software does
> that anymore. Nero (at least through version 5.5) used a .vxd driver file
to *only*
> disable the autoinsert notification while the Nero program was in use,
effectively
> overriding temporarily the enabled setting in Device Manager. I don't
recall what
> method Easy CD Creator used, but IIRC they did not disable autoinsert in
DM, at
> least not in the more recent versions. The fact that the OP refers to a
DVD drive
> indicates (hopefully) that the associated software is more recent. It
would
> certainly be helpful if they would post back with details such as what
burning
> softwares and versions are installed, if the problem persists after
following Jon's
> procedure. :-)
> --
> Glen Ventura, MS MVP Shell/User, A+
> http://dts-l.org/goodpost.htm
>
> "Lil' Dave" <spamyourself@virus.net> wrote in message
> news:%23$fxZegMFHA.3356@TK2MSFTNGP12.phx.gbl...
> > You're right. However, some burner software installations disabled this
on
> > purpose for proper operation.
> > "Jon_Hildrum" <Jon_Hildrum@amsn.com> wrote in message
> > news Mn8L8fMFHA.1396@TK2MSFTNGP10.phx.gbl...
> > > Try Control panel -system applet - Highlight the DVD drive and click
> > > properties.
> > >
> > > Click the settings tab and make sure Auto Insert Notification is
checked.
> > >
> > > --
> > > Jon Hildrum
> > > DTS MVP
> > > Jon_Hildrum@msn.com
> > > www.hildrum.com
> > > "Paolo" <paolotripi@aliceposta.it> wrote in message
> > > news:ukMxfydMFHA.2136@TK2MSFTNGP14.phx.gbl...
> > > > From some days if i insert a CD of software in the Lite-On LTR
48246S
> > DVD
> > > > drive it doesn't start automaticly as before and now i need always
to
> > > start
> > > > it manually:
> > > > I don't understand why is happen and how to solve it these strange
> > > behavior
> > > > of the drive.
> > > > Thank you in advance for help
> > > > Paolo
> > > >
> > > >
> > >
> > >
> >
> >
>

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

Sorry...AFAIK = As Far As I Know
Neither of the two programs you mention will disable autoinsert notification on
their own, nor do they normally need to, AFAIK.
Do you have Autoinsert Notification enabled for the DVD drive, as Jon explained in
his reply?
Start> Settings> Control Panel> System> Device Manager tab, click the + sign next to
the CDROM category to open it, then double-click the DVD drive there. Click the
Settings tab and ensure that the Autoinsert Notification box is check-marked....if
not, check it and click OK all the way out, then reboot.

If that does not help, you may have autorun disabled. The easiest way to adjust
that is to install TweakUI, and then enable Autorun for data and audio CD's on the
TweakUI Paranoia tab.
TweakUI1.33:
http://www.microsoft.com/ntworkstation/downloads/powert...

Otherwise, you must go into the Registry with regedit and change the settings
there....TweakUI is much easier and safer.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/goodpost.htm


"Paolo" <paolotripi@aliceposta.it> wrote in message
news:eMU662nMFHA.2420@TK2MSFTNGP12.phx.gbl...
> Im sorry but i'm notfamiliar with english and specially with some acronym.
> What do you means with AFAIK ?
> I have in my computer installed Nero Burning version 5.5 and Easy CD-DA
> Extractor version 8.0.1 (a tria version)
> Thank you for help
> Paolo
>
>
> "glee" <glee29@spamindspring.com> ha scritto nel messaggio
> news:%23dVciyhMFHA.3380@TK2MSFTNGP15.phx.gbl...
> > That was true once upon a time, but AFAIK no remotely recent burning
> software does
> > that anymore. Nero (at least through version 5.5) used a .vxd driver file
> to *only*
> > disable the autoinsert notification while the Nero program was in use,
> effectively
> > overriding temporarily the enabled setting in Device Manager. I don't
> recall what
> > method Easy CD Creator used, but IIRC they did not disable autoinsert in
> DM, at
> > least not in the more recent versions. The fact that the OP refers to a
> DVD drive
> > indicates (hopefully) that the associated software is more recent. It
> would
> > certainly be helpful if they would post back with details such as what
> burning
> > softwares and versions are installed, if the problem persists after
> following Jon's
> > procedure. :-)
> > --
> > Glen Ventura, MS MVP Shell/User, A+
> > http://dts-l.org/goodpost.htm
> >
> > "Lil' Dave" <spamyourself@virus.net> wrote in message
> > news:%23$fxZegMFHA.3356@TK2MSFTNGP12.phx.gbl...
> > > You're right. However, some burner software installations disabled this
> on
> > > purpose for proper operation.
> > > "Jon_Hildrum" <Jon_Hildrum@amsn.com> wrote in message
> > > news Mn8L8fMFHA.1396@TK2MSFTNGP10.phx.gbl...
> > > > Try Control panel -system applet - Highlight the DVD drive and click
> > > > properties.
> > > >
> > > > Click the settings tab and make sure Auto Insert Notification is
> checked.
> > > >
> > > > --
> > > > Jon Hildrum
> > > > DTS MVP
> > > > Jon_Hildrum@msn.com
> > > > www.hildrum.com
> > > > "Paolo" <paolotripi@aliceposta.it> wrote in message
> > > > news:ukMxfydMFHA.2136@TK2MSFTNGP14.phx.gbl...
> > > > > From some days if i insert a CD of software in the Lite-On LTR
> 48246S
> > > DVD
> > > > > drive it doesn't start automaticly as before and now i need always
> to
> > > > start
> > > > > it manually:
> > > > > I don't understand why is happen and how to solve it these strange
> > > > behavior
> > > > > of the drive.
> > > > > Thank you in advance for help
> > > > > Paolo
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
>
>

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

AFAIK = As far as I know

--

Brian A.

Conflicts start where information lacks.
http://www.dts-l.org/goodpost.htm




"Paolo" <paolotripi@aliceposta.it> wrote in message
news:eMU662nMFHA.2420@TK2MSFTNGP12.phx.gbl...
> Im sorry but i'm notfamiliar with english and specially with some acronym.
> What do you means with AFAIK ?
> I have in my computer installed Nero Burning version 5.5 and Easy CD-DA
> Extractor version 8.0.1 (a tria version)
> Thank you for help
> Paolo
>
>
> "glee" <glee29@spamindspring.com> ha scritto nel messaggio
> news:%23dVciyhMFHA.3380@TK2MSFTNGP15.phx.gbl...
>> That was true once upon a time, but AFAIK no remotely recent burning
> software does
>> that anymore. Nero (at least through version 5.5) used a .vxd driver file
> to *only*
>> disable the autoinsert notification while the Nero program was in use,
> effectively
>> overriding temporarily the enabled setting in Device Manager. I don't
> recall what
>> method Easy CD Creator used, but IIRC they did not disable autoinsert in
> DM, at
>> least not in the more recent versions. The fact that the OP refers to a
> DVD drive
>> indicates (hopefully) that the associated software is more recent. It
> would
>> certainly be helpful if they would post back with details such as what
> burning
>> softwares and versions are installed, if the problem persists after
> following Jon's
>> procedure. :-)
>> --
>> Glen Ventura, MS MVP Shell/User, A+
>> http://dts-l.org/goodpost.htm
>>
>> "Lil' Dave" <spamyourself@virus.net> wrote in message
>> news:%23$fxZegMFHA.3356@TK2MSFTNGP12.phx.gbl...
>> > You're right. However, some burner software installations disabled this
> on
>> > purpose for proper operation.
>> > "Jon_Hildrum" <Jon_Hildrum@amsn.com> wrote in message
>> > news Mn8L8fMFHA.1396@TK2MSFTNGP10.phx.gbl...
>> > > Try Control panel -system applet - Highlight the DVD drive and click
>> > > properties.
>> > >
>> > > Click the settings tab and make sure Auto Insert Notification is
> checked.
>> > >
>> > > --
>> > > Jon Hildrum
>> > > DTS MVP
>> > > Jon_Hildrum@msn.com
>> > > www.hildrum.com
>> > > "Paolo" <paolotripi@aliceposta.it> wrote in message
>> > > news:ukMxfydMFHA.2136@TK2MSFTNGP14.phx.gbl...
>> > > > From some days if i insert a CD of software in the Lite-On LTR
> 48246S
>> > DVD
>> > > > drive it doesn't start automaticly as before and now i need always
> to
>> > > start
>> > > > it manually:
>> > > > I don't understand why is happen and how to solve it these strange
>> > > behavior
>> > > > of the drive.
>> > > > Thank you in advance for help
>> > > > Paolo
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>>
>
>