Fan choices

[7H4_D00D3]

Bewteen http://www.newegg.com/Product/Product.asp?Item=N82E16811999118
http://www.newegg.com/Product/Product.asp?Item=N82E16835999111
http://www.newegg.com/Product/Product.asp?Item=N82E16811999344

Which fan (s) would you choose? Maximum spendage= 30-32$

Suggestions are welcome, the only sure thing is that they have to be variable speed, preferably 2-ball ant the combination of various fans must have the least amount of power connectors as possible

 

[7H4_D00D3]

I could fit a 120mm fan on the case (Just a little bit of work, nothing outwordly) but a ~100mm with a lot of airflow could be nice too

My original plan was to pair the FM121 with the single TT 80mm fan

ALso, what would be the better position for the fans to increase overall airflow

 

[7H4_D00D3]

What would be best? the FM121 sucking in (side) and the lone TT 80mm fan sucking out (along with an old PSU fan)(back) or the FM121 suckin in (front and bottom) and the TT 80mm sucking out (back) (still not sure if the 120mm will fit in the front and even if it does the intake would be restricted by the case)?

 

[bob8701]

cold air come in from front bottom, go cool down hard drive first, then some air go through video card, some go through cpu fan, rest cool down power supply, no side window, by set up this way, pc have no hot air pocket, and all hot parts get cool air. this should be the best way,
by the way, check your pc bottom, if there are some holes, by lift pc half inch above floor, it should help you too.

 

[PhearChyld]

I bought a couple of these:
http://www.coolerguys.com/840556021605.html

The only thing about these are that they are only meant to blow air out of a case unless you want to mount them on the outside. Basicly they are only good if you plan on moding your case

My second choice are these:
http://www.coolerguys.com/sff21.html

Nice an quiet decent enough airflow I will end up buying a couple of these for my current gaming rig.