3 monitors crash my system

Archived from groups: alt.games.microsoft.flight-sim (More info?)

"Jim Stewart" <jstewart@jkmicro.com> schreef in bericht
news:cuOdnWgPI_IqgXzfRVn-gQ@omsoft.com...
> I'm running XP pro and FS 2004. I've installed
> 2 graphics adapters, a Gforce 2-head AGP and an
> ATI something. I've hooked up monitors to all
> the vga outputs.
>
> I can set everything up just fine with Windows,
> launch FS, undock the main window and create 2
> more views and move them to the side monitors
> just fine. I can size the main monitor and one
> of the side monitors just fine and fly. As soon
> as I try to size the third monitor full size,
> FS (and Windows) crashes.
>
> I've tried different combinations of main and
> side monitors routed to the Gforce and the ATI
> and it doesn't make any difference. Size the
> third monitor and it dies.
>
> I know I've been vague about the specific types
> of controllers I have. That's because I don't
> have the info in front of me. I'll try to get
> it.
>
> Does anyone know of a known good combination of
> AGP and PCI controllers that will run a three
> monitor setup reliably. I don't have the cash
> for a PCIexpress setup.
>
> Thanks

Use 3 videocarts of the same brand so you can install 1 driver for 3 cards.
In this way I use 3 screens without problems.
look here: http://www.borrasart.com/flightsimulator.htm

pieter.

Archived from groups: alt.games.microsoft.flight-sim (More info?)

I have tried this with no success either. I believe the problem lies with
the PCI bus being unable to keep up with the AGP. No matter how good the PCI
vid card is, it will never compete with the AGP and when you stretch the FS
view to the 3rd monitor, its crash time (or you will get at most 1 fps lol)

I have researched this problem and it seems the only solutions are
1- Use 2 PCs with Wideview (no virtual cockpit across 3 monitors though)
2- Get a Matrox Parhelia vid card (supports 3 monitors)
<-- the best option I think
3- Get a motherboard which supports PCI express AND AGP. Fairly rare and
expensive I think, but I have seen articles about them.


Sorry to be of no help

Bryan



"Jim Stewart" <jstewart@jkmicro.com> wrote in message
news:cuOdnWgPI_IqgXzfRVn-gQ@omsoft.com...
> I'm running XP pro and FS 2004. I've installed
> 2 graphics adapters, a Gforce 2-head AGP and an
> ATI something. I've hooked up monitors to all
> the vga outputs.
>
> I can set everything up just fine with Windows,
> launch FS, undock the main window and create 2
> more views and move them to the side monitors
> just fine. I can size the main monitor and one
> of the side monitors just fine and fly. As soon
> as I try to size the third monitor full size,
> FS (and Windows) crashes.
>
> I've tried different combinations of main and
> side monitors routed to the Gforce and the ATI
> and it doesn't make any difference. Size the
> third monitor and it dies.
>
> I know I've been vague about the specific types
> of controllers I have. That's because I don't
> have the info in front of me. I'll try to get
> it.
>
> Does anyone know of a known good combination of
> AGP and PCI controllers that will run a three
> monitor setup reliably. I don't have the cash
> for a PCIexpress setup.
>
> Thanks