I have 3 sata hdds, 2 of which I would like to use to create a raid0 setup. I've looked through the manual for the mobo and I should be ok configuring the drives.
However, I'm not sure how they should be connected to the mobo. There are 4 sata connections on the motherboard, but also a 'silicon image sata raid connector'.
Is it just a matter of plugging the 3 hdds into the normal connections and configuring the raid0 setup in the bios or does one of the hdds need to be connected to the silicon image sata raid connector'?
However, I'm not sure how they should be connected to the mobo. There are 4 sata connections on the motherboard, but also a 'silicon image sata raid connector'.
Is it just a matter of plugging the 3 hdds into the normal connections and configuring the raid0 setup in the bios or does one of the hdds need to be connected to the silicon image sata raid connector'?