Word :    Username :           
 

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

 

I have two usb ports one for an adsl modem(for broadband) and another for
my webcam
thea adsl modem is SMC adsl modem 7003usb v.2
and the webcam is logitech

sometimes the computer does not recognise usb. I had to shutdown (not mere
restart) and then start again then it recognises. sometimes I had to
disconnect the adsl modem and reconnect on the modem side (not the computer
end). I am little worried constant disconnect/reconnect may spoil the pin
in the modem.

is it necessary to remove the usbs and put a fresh usbs or is there any
other solution;.

my os is windows 98 SE

Sponsored Links
Register or log in to remove.

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

 

"R.VENKATARAMAN" <vram26@vsnl$$$.net> wrote in
news:#80ZmDxbFHA.2520@TK2MSFTNGP09.phx.gbl:

> I have two usb ports one for an adsl modem(for broadband) and another
> for my webcam
> thea adsl modem is SMC adsl modem 7003usb v.2
> and the webcam is logitech
>
> sometimes the computer does not recognise usb. I had to shutdown (not
> mere restart) and then start again then it recognises. sometimes I
> had to disconnect the adsl modem and reconnect on the modem side (not
> the computer end). I am little worried constant disconnect/reconnect
> may spoil the pin in the modem.
>
> is it necessary to remove the usbs and put a fresh usbs or is there
> any other solution;.
>
> my os is windows 98 SE
>
>
>
>

Try to install the latest chipset drivers from the motherboard.

Reply to Anonymous

Archived from groups: microsoft.public.win98.gen_discussion (More info?)

 

thank you both of you. I shall tell the service engineer.


Ingeborg <a@b.invalid> wrote in message
news:Xns9673968E6AAD0abinvalid@213.73.255.55...
> "R.VENKATARAMAN" <vram26@vsnl$$$.net> wrote in
> news:#80ZmDxbFHA.2520@TK2MSFTNGP09.phx.gbl:
>
> > I have two usb ports one for an adsl modem(for broadband) and another
> > for my webcam
> > thea adsl modem is SMC adsl modem 7003usb v.2
> > and the webcam is logitech
> >
> > sometimes the computer does not recognise usb. I had to shutdown (not
> > mere restart) and then start again then it recognises. sometimes I
> > had to disconnect the adsl modem and reconnect on the modem side (not
> > the computer end). I am little worried constant disconnect/reconnect
> > may spoil the pin in the modem.
> >
> > is it necessary to remove the usbs and put a fresh usbs or is there
> > any other solution;.
> >
> > my os is windows 98 SE
> >
> >
> >
> >
>
> Try to install the latest chipset drivers from the motherboard.

Reply to Anonymous
Tom's Hardware > Forum > Windows 95/98/ME > Windows 95/98/Me General Discussion > computer not recognising usb
Go to:

There are 1113 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them