Archived from groups: comp.dcom.sys.cisco,comp.dcom.voice-over-ip (More info?)
Hi,
I have a 1761 router with CallManager Express software.
I would like to be able to call an external number via a SIP provider.
Right now I have connected a GrandStream HandyTone 286 ATA adapter to an FXO
port on my 1761 router and then I call out via that FXO port. It work but it
is an expensive solution because I have to have an FXO card and a ATA box.
I have tried to configure a dial-peer to call via the sip-server but I can
not get it to work.
Can anyone help me with this? e.g. a sample config.
My SIP provider has provided me with this info:
Usernavn
Password
Phone number
SIP-server
Archived from groups: comp.dcom.sys.cisco,comp.dcom.voice-over-ip (More info?)
"Daniel I" <danieli37@hotmail.com> skrev i en meddelelse
news:417f7e24$0$187$edfadb0f@dread11.news.tele.dk...
> Hi,
> I have a 1761 router with CallManager Express software.
> I would like to be able to call an external number via a SIP provider.
>
This will not work. You will need a gateway betveen the SIP provider and the
Call Manager since the Call Manager does not support SIP.
I had the same problem but not with Call Manager Express. I have a Call
Manager 3.3.4 that I wanted to connect to my SIP provider that also supports
AIX. Fixed it by placing an Asterisk as a gateway using H.323 to AIX.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.