DVD Rom causes BSOD

G

Guest

Guest
Archived from groups: microsoft.public.win98.gen_discussion (More info?)

I just cleaned up a Presario 5852. It had a pretty good dose of spyware.
I don't know if that is pertinent or not since this problem existed both
before and after I cleaned it up. It has a DVD Rom which is original
equipment and an added CDRW drive. Cable select cable and both drives
jumpered for CD. When you insert a CD in the DVD drive, you get an
unrecoverable BSOD. The CDRW drive works alright. If I boot from a
startup disk, both drives work OK. A boot CD will work in either drive,
so it must be a Windows thing.
This is a 550Mhz machine with 128Mb ram.
Right now I'm doing a repair install on it (SE) but I don't really expect
that to fix it. I imagine it's something in the registry that a repair
install won't change.
Any ideas?


--
--- A Freudian slip is when you say one thing but mean your mother. ---
 
G

Guest

Guest
Archived from groups: microsoft.public.win98.gen_discussion (More info?)

Well, by now you should know how I feel about "reinstalling" Windows. Too
late, I guess.

What *I* would have done is to boot into Safe Mode, go to Device Manager and
delete the entire IDE tree--ALL drives, ALL controllers (except the FIFOs,
which can't be deleted in Device Manager) and the System device called PCI
Bus. Then restart and let Windows reinstall. Will take at least one more
restart to finish installing the drives.

--
Gary S. Terhune
MS-MVP Shell/User

"Menno Hershberger" <mhersh22@nosguchplace.net> wrote in message
news:Xns96C3EE7AF86ECbutter@daisymae.com...
>I just cleaned up a Presario 5852. It had a pretty good dose of spyware.
> I don't know if that is pertinent or not since this problem existed both
> before and after I cleaned it up. It has a DVD Rom which is original
> equipment and an added CDRW drive. Cable select cable and both drives
> jumpered for CD. When you insert a CD in the DVD drive, you get an
> unrecoverable BSOD. The CDRW drive works alright. If I boot from a
> startup disk, both drives work OK. A boot CD will work in either drive,
> so it must be a Windows thing.
> This is a 550Mhz machine with 128Mb ram.
> Right now I'm doing a repair install on it (SE) but I don't really expect
> that to fix it. I imagine it's something in the registry that a repair
> install won't change.
> Any ideas?
>
>
> --
> --- A Freudian slip is when you say one thing but mean your mother. ---
 
G

Guest

Guest
Archived from groups: microsoft.public.win98.gen_discussion (More info?)

"Menno Hershberger" <mhersh22@nosuchplace.net> wrote in message
news:Xns96C3EE7AF86ECbutter@daisymae.com...

> . . . before and after I cleaned it up. It has a DVD Rom which is original
> equipment and an added CDRW drive. Cable select cable and both drives
> jumpered for CD. When you insert a CD in the DVD drive, you get an
> unrecoverable BSOD. The CDRW drive works alright. If I boot from a
> startup disk, both drives work OK. A boot CD will work in either drive,
> so it must be a Windows thing.

Can this be right? CD and hard drives are jumpered for master/slave
connection, not "jumpered for CD."
Secondly, older PCs with two CD drives seem to prefer that the CDRW
drive be connected as master.

--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)
 
G

Guest

Guest
Archived from groups: microsoft.public.win98.gen_discussion (More info?)

Yeah, I did that. There were a few extra drives still listed that had
been on there before. Came back with the same problem. This whole thing
is turning into a nightmare. I can't do a repair install because after
the install gets the files copied and reboots, I wind up at the command
prompt with a message that the registry is screwed up and to run scanreg.
If I do that, then it boots back into the old install. I even tried
setting it back to the oldest restore date that was available and booting
it up a couple of times to make sure it would stick. But then when I
started the repair install again, it'd do the same thing. It's going to
get a format and fresh install... I've wasted too much time already.


"Gary S. Terhune" <grystnews@mvps.org> wrote in
news:uQ4xt8qrFHA.2996@tk2msftngp13.phx.gbl:

> Well, by now you should know how I feel about "reinstalling" Windows.
> Too late, I guess.
>
> What *I* would have done is to boot into Safe Mode, go to Device
> Manager and delete the entire IDE tree--ALL drives, ALL controllers
> (except the FIFOs, which can't be deleted in Device Manager) and the
> System device called PCI Bus. Then restart and let Windows reinstall.
> Will take at least one more restart to finish installing the drives.
>



--
--- A Freudian slip is when you say one thing but mean your mother. ---
 
G

Guest

Guest
Archived from groups: microsoft.public.win98.gen_discussion (More info?)

I figured it was headed for the nuclear option. Gotta think malware is
involved somehow. You previously wiped the IDE tree altogether and
reinstalled?

Anyway, have fun, <eg>.

--
Gary S. Terhune
MS-MVP Shell/User

"Menno Hershberger" <mhersh22@nosuchplace.net> wrote in message
news:Xns96C48DCED28F3butter@daisymae.com...
> Yeah, I did that. There were a few extra drives still listed that had
> been on there before. Came back with the same problem. This whole thing
> is turning into a nightmare. I can't do a repair install because after
> the install gets the files copied and reboots, I wind up at the command
> prompt with a message that the registry is screwed up and to run scanreg.
> If I do that, then it boots back into the old install. I even tried
> setting it back to the oldest restore date that was available and booting
> it up a couple of times to make sure it would stick. But then when I
> started the repair install again, it'd do the same thing. It's going to
> get a format and fresh install... I've wasted too much time already.
>
>
> "Gary S. Terhune" <grystnews@mvps.org> wrote in
> news:uQ4xt8qrFHA.2996@tk2msftngp13.phx.gbl:
>
>> Well, by now you should know how I feel about "reinstalling" Windows.
>> Too late, I guess.
>>
>> What *I* would have done is to boot into Safe Mode, go to Device
>> Manager and delete the entire IDE tree--ALL drives, ALL controllers
>> (except the FIFOs, which can't be deleted in Device Manager) and the
>> System device called PCI Bus. Then restart and let Windows reinstall.
>> Will take at least one more restart to finish installing the drives.
>>
>
>
>
> --
> --- A Freudian slip is when you say one thing but mean your mother. ---