IntelliMouse Optical

[Guest]

I'm having a problem that my friend isn't, and he has the exact same mouse and Windows Me installed as well:

Earlier, I was having a problem even having the Hibernation mode available for WinMe. Now, once I have it available, I can't go into Stand by or Hibernation mode because "My HID-class device is preventing me." My IntelliMouse is obviously my HID. What can I do? I've already installed IntelliPoint 3.2, and done a fresh install of WinMe...

sy[161]e :tongue:
<A HREF="http://www.sy161e.net/" target="_new">http://www.sy161e.net/</A>

 

[Majeskty]

I just read an article that mentions the hibernation mode for Windows98 SE ?? and they said this feature can not be used with FAT32 partitions. You can use a bootdisk and go into Fdisk and see what system your partitions are I believe is options 4 for displaying your partition information. One of the displays will say FAT32 or FAT16 etc.

 

[blah]

It is much easier to right click on the drive in the windows explorer and select Properties to see what the File System it has (FAT, FAT32, etc).


it is a mistake to be afraid to make one...

 

[JoeHead]

I heard there are some probs with hybernate and Me. Look around for answer. A pal of mine has same prob.

Hey shut off off hybernate!!!

<b> Fragg at will!!! </b>