Looking for a modular powersupply

[Nitro350Z]

Is there a modular powersupply, preferably around 600w, that can support a X1900 Xfire setup?

I was thinking of a 620w Enermax Liberty, but ive seen some people say that they cant handle X1900's in Xfire, is this true?

 

[pengwin]

Antec NeoHE 550w.


3 12v rails each with 13 Amps.

i have the 500w version with an X1900XT and an opteron 146, 2 HDD's and a audigy 2 ZS runs fine.

550w version should support ur system

 

[Nitro350Z]

Thanks, looks like a very solid powersupply

 

[wun911]

Tagan easycon 550 w

Silverstone St60F (600w)

 

[Xanthro]

600W SilverStone ST60F is actually 650 watt, but they lowered the rating because of the modular connections.

4 very stable 12v rails and plenty of power for Crossfire.

Mine was blowing into the case, but that was easily fixed. They also answered the phone on the first ring and my hold time was less than 10 seconds will being transfered, so great customer service if you ever need it.

All cables are very nicely sheathed except for the last 1.24" near each connector, and the extensions are not sheathed. So the molex connectors are sheathed from the PSU to the first molex, then bare wire till the second molex and bare wire for the floppy connector when it has one.

The above is my only complaint, but I'm anal about not having bare wires showing inside the case.