There's a bug in my printer, dear Liza, dear Liza...

Archived from groups: comp.periphs.printers (More info?)

I wouldn't sweat it. But it might turn up in one of your prints. Oh my, do
you suppose it's making a nest in there?



"Miss Perspicacia Tick" <test@test.com> wrote in message
news:UY30e.13047$DF4.6985@fe06.highwinds-media.phx...
> OK, not a bug, a crane fly (but that wouldn't have scanned), but it fell
in
> down the paper tray and I didn't see it fly out... (the unit in question
is
> an R800).
>
> I have lifted the lid and shone a torch around, but I couldn't see it, and
I
> hardly think the warranty covers "acts of insect".
>
> If it is still in there, and has worked itself further down into the
> mechanism (and I really don't want to have to dismantle it as I'm sure I
> wouldn't be able to reassemble)
>
> What damage could it cause - it wasn't one of the larger ones (I don't
know
> whether there are crane files in other parts of the world, but I assume
> there must be) - it was about an inch or so, head to end of abdomen (they
> can grow to 3" or so sometimes), but I'm concerned that, if I print, it
will
> 'gum up the works" and damage the mechanism.
>
> So, anyone any suggestions, or theories as to the damage a crane fly in
the
> works would do...?
> --
> In memory of MS MVP Alex Nichol: http://www.dts-l.org/
>
>

Archived from groups: comp.periphs.printers (More info?)

pete wrote:
> On Wed, 23 Mar 2005 01:51:43 -0000, "Miss Perspicacia Tick"
> <test@test.com> wrote:
>
>
> <snip>
>
>> So, anyone any suggestions, or theories as to the damage a crane fly
>> in the works would do...?
>
> The worst it can do is lay a few million eggs.
> Otherwise, it will dry up, dust to dust.

I realise that - I just didn't want squashed fly on my photos....

Thanks folks...


--
In memory of MS MVP Alex Nichol: http://www.dts-l.org/

Archived from groups: comp.periphs.printers (More info?)

Trying any of the suggestions below are done with the acknowledgment
that you may be taking a risk of damaging your person or your printer,
and as such, you assume full responsibility for any such damage or accident.

Hmmm... I deal with printer bugs quite regularly, but they usually
aren't quite so organic.

The good thing about crane flies is they have little actual "bug
density" to them. They usually desiccate pretty quickly once they die.

I would try to find some inkjet "cleaning pages" if some still exist, or
*maybe* use the ones designed for the older fax machines, and run it
through the printer with no printing occurring (just using the load and
eject buttons a few time) Hopefully, any bug remnants will get stuck to
the paper and come out.

Art


Miss Perspicacia Tick wrote:

> OK, not a bug, a crane fly (but that wouldn't have scanned), but it fell in
> down the paper tray and I didn't see it fly out... (the unit in question is
> an R800).
>
> I have lifted the lid and shone a torch around, but I couldn't see it, and I
> hardly think the warranty covers "acts of insect".
>
> If it is still in there, and has worked itself further down into the
> mechanism (and I really don't want to have to dismantle it as I'm sure I
> wouldn't be able to reassemble)
>
> What damage could it cause - it wasn't one of the larger ones (I don't know
> whether there are crane files in other parts of the world, but I assume
> there must be) - it was about an inch or so, head to end of abdomen (they
> can grow to 3" or so sometimes), but I'm concerned that, if I print, it will
> 'gum up the works" and damage the mechanism.
>
> So, anyone any suggestions, or theories as to the damage a crane fly in the
> works would do...?