- Jul 9, 2005
- 13
- 0
- 18,510
OK, so I dissasssembled a TFT monitor for an overhead projector, specifically the Cornea MP503, which THG listed as working for projectors.
What's my problem, you ask?
The red cable goes in the red socket, and the blue cable goes in the blue socket. The cables normally go on top, but that'd obscure the image. So, what do I do?
Thanks guys.[/img]
What's my problem, you ask?
The red cable goes in the red socket, and the blue cable goes in the blue socket. The cables normally go on top, but that'd obscure the image. So, what do I do?
Thanks guys.[/img]
Facebook
Twitter
Instagram