voip on Bay/Nortel ARN w/ BayRS 14.0

[Guest]

Archived from groups: comp.dcom.voice-over-ip (More info?)

I've got a Nortel ARN that has worked fine for 10 years, most recently
on BayRS 13.2. We subscribed to Vonage and installed four VOIP
adapters on our network and now have problems.

Basically, voice calls are fine so long as no traffic goes over the
link. If you initiate the call, then, for example, begin an FTP
download over the T1 link, the phone call immediately goes garbled
and is hardly usable.

I upgraded the router to 14.0 and enabled both DiffServ and RSVP, but
do not know how to use them properly.

Our support contract has run out and I'm investigating getting a
renewal so I can download the latest BayRS but I'm wondering if this
will solve the problem or if there is something else I can do.

Any advice would be greatly appreciated.

sean

 

[Guest]

Archived from groups: comp.dcom.voice-over-ip (More info?)

seanfulton wrote:
> I've got a Nortel ARN that has worked fine for 10 years, most recently
> on BayRS 13.2. We subscribed to Vonage and installed four VOIP
> adapters on our network and now have problems.
>
> Basically, voice calls are fine so long as no traffic goes over the
> link. If you initiate the call, then, for example, begin an FTP
> download over the T1 link, the phone call immediately goes garbled
> and is hardly usable.
>
> I upgraded the router to 14.0 and enabled both DiffServ and RSVP, but
> do not know how to use them properly.
>
> Our support contract has run out and I'm investigating getting a
> renewal so I can download the latest BayRS but I'm wondering if this
> will solve the problem or if there is something else I can do.
>
> Any advice would be greatly appreciated.
>
> sean
>

Seen my reply to your post in comp.dcom.sys.nortel.