Tom's Hardware > Forum > Storage > Hard Disks > Hard Drive Setup

Hard Drive Setup

Forum Storage : Hard Disks - Hard Drive Setup

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Okay People:
This is my first post in Tom's Forumz,and I know someone can help me out
with a new hard drive setup.What I want to do is to install a 36gb "raptor" as my boot drive and a pair of 160gb NCQ Seagates in raid 1 for storage.I have an ASUS motherboard with 4 sata ports.2 are marked Master and 2 are marked slave.The manual isn't very clear,but am I right in thinking that the raptor should be on a master port and the two storage drives on slave ports.
Am I going to have problems installing the raid driver with this.Thanks

Sponsored Links
Register or log in to remove.

Does not actually matter - you select boot drive in BIOS - Raid in Raid utility.

Reply to ms2005
Tom's Hardware > Forum > Storage > Hard Disks > Hard Drive Setup
Go to:

There are 596 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them