Magicolor 3300 - Network and HD trouble

Archived from groups: comp.periphs.printers (More info?)

In message <1117114034.181626.148790@g47g2000cwa.googlegroups.com>, Marc
Wolters <roundel@gmx.net> writes
>Some really strange things go on here:
>
>Since the HD is installed (and working fine as it seems) the network
>throughput is close to 0. Without the HD installed I have around 1240
>Kbytes or nearly 10 MBit - not much since it's a 100 MBit Connection
>(set to autodetect on both ends) but enough. Now when the HD is
>installed the speed drops to < 50 Kbytes or below 0,5 MBit. Is there
>any way to fix this?

With the hd there is it always writing to the disk before printing?
Could it be a fault with the disk that it cant write to it at a normal
speed.

If it is only doing c. 10 MBit without is it possible to tell it is has
a 100 MBit connection rather than the autodetect?

--
Timothy