i am lookin at the new c2d's but i dont want to buy a higher priced one if i could just overclock it manualy ................. but i heard overclocking dual cores is a very bad idea because of the overheating and frying your cpu along wit ur mb
I think this is down to all the people these days that scream about wanting low power usage and cool CPUs that can be run with the minimum of cooling.
This means that people like me that dont give a damn about power consumption, heat levels, or noise, can just overvolt and overclock
They could have just sold the e6300 clocked at 3.2ghz for example, and the other models rising from there, but then all their detractors would scream about the thing using too much power and performance per watt etc.
im just afraid of burnin the thing up but i dont need to worry about that if i have a good heatsink and fan
any suggestions on some heatsinks or fans?
Go ahead and read the links Jack gave you first. You can do a decent OC on stock cooling. If you got an OEM CPU with no HSF, there are excellent inexpensive units such as this Arctic FP7 or you can get something more expensive if you wish - just search Newegg or Frozen CPU, etc. But that Arctic will get you way down the Core 2 Duo OC dance path. No need to worry about frying things as long as you follow a patient logical plan. Think of it as a journey into a Zen-like state.
They could have just sold the e6300 clocked at 3.2ghz for example, and the other models rising from there, but then all their detractors would scream about the thing using too much power and performance per watt etc.
If they sold it at 3.2, you'd have no fun wringing out the last bit. It's much more fun to score a big OC than a tweek.
im just afraid of burnin the thing up but i dont need to worry about that if i have a good heatsink and fan
any suggestions on some heatsinks or fans?
You won't "burn the thing up", I promise. It's very hard to do that. Only obscene overvolts (as in, don't try to push 2V into your 65nm chip) will fry a chip in the short term. In the long term, just don't push voltage up past about 30% of stock V-core. Heat is mostly irrelevant: just keep temps below 70-80°C and you'll be fine.
The same things can be said for the motherboard: don't worry about breaking it, just don't be stupid. Keep V-cores within 25-30% of stock.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.