Sign in with
Sign up | Sign in
Your question

DNS issues

Last response: in Windows 2000/NT
Share
Anonymous
August 3, 2004 4:51:01 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello,
I have had a number of issues with my DNS srever. I am running Small Biz Server 2000 with Win 2K server SP 4, Exchange 2000 SP1. Everyting was working fine until I tried to change the default IP address on our router which is the DHCP provider. I am using RRAS on that server and have performed the steps in 292822 - Name resolution and connectivity issues on a Routing and Remote
Access Server that also runs DNS or WINS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
When I restart the DNS services I get "The DNS Server machine currently has no DNS domain nmae. Its DNS name is a single label hostname with no domain (example: "host" rather than "host.microsoft.com")"
It proceeds to tell me I may have failed to configure a primary DNS domain for the server computer and I should go to the Network Identification tab and change the domain name.
The Network Identification tab is set properly.
When I try to reload the forward lookup zone that is the same as my domain name, my SOA Primary server value only has the server name. and not the domain attached to it. Also, a Name Servers record is created with just the server name and and IP address of Unknown. There is a second name server listing that has the FQDN and the correct IP Address.
I can manually go in and correct these settings but when I reload the lookup zone they reset themselves.
Thank you,
Mark

More about : dns issues

Anonymous
August 3, 2004 7:32:47 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

In news:BFBC8C5A-DE67-40EE-AE15-ABF79BAF7D39@microsoft.com,
Markw911 <Markw911@discussions.microsoft.com> posted a question
Then Kevin replied below:
> Hello,
> I have had a number of issues with my DNS srever. I am
> running Small Biz Server 2000 with Win 2K server SP 4,
> Exchange 2000 SP1. Everyting was working fine until I
> tried to change the default IP address on our router
> which is the DHCP provider. I am using RRAS on that
> server and have performed the steps in 292822 - Name
> resolution and connectivity issues on a Routing and
> Remote
> Access Server that also runs DNS or WINS:
> http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
> When I restart the DNS services I get "The DNS Server
> machine currently has no DNS domain nmae. Its DNS name
> is a single label hostname with no domain (example:
> "host" rather than "host.microsoft.com")"
> It proceeds to tell me I may have failed to configure a
> primary DNS domain for the server computer and I should
> go to the Network Identification tab and change the
> domain name.
> The Network Identification tab is set properly.
> When I try to reload the forward lookup zone that is the
> same as my domain name, my SOA Primary server value only
> has the server name. and not the domain attached to it.
> Also, a Name Servers record is created with just the
> server name and and IP address of Unknown. There is a
> second name server listing that has the FQDN and the
> correct IP Address.
> I can manually go in and correct these settings but when
> I reload the lookup zone they reset themselves.
> Thank you,
> Mark

Can you post an unedited ipconfig /all please?

--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
--
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your
issue. To respond directly to me remove the nospam. from my
email. ==========================================
http://www.lonestaramerica.com/
==========================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
Anonymous
August 4, 2004 1:49:01 AM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
Ipconfig /all reads as follows:
Local Area Connection
DHCP Enabled: No
IP Address: 192.168.1.2
Subner mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Servers: 192.168.1.2
Primary DNS Server: 192.168.1.2

PPP adapter RAS Server (Dial In) Interface:
DHCP Enabled: No
IP Address: 172.16.1.1
Subnet mask: 255.255.255.255
Deafult Gateway: <blank>
DNS Servers: 127.0.0.1

I have performed the steps in kb article 292822 - Name resolution and connectivity issues on a Routing and Remote Access Server that also runs DNS or WINS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822

Thanks,
Mark


"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:BFBC8C5A-DE67-40EE-AE15-ABF79BAF7D39@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> posted a question
> Then Kevin replied below:
> > Hello,
> > I have had a number of issues with my DNS srever. I am
> > running Small Biz Server 2000 with Win 2K server SP 4,
> > Exchange 2000 SP1. Everyting was working fine until I
> > tried to change the default IP address on our router
> > which is the DHCP provider. I am using RRAS on that
> > server and have performed the steps in 292822 - Name
> > resolution and connectivity issues on a Routing and
> > Remote
> > Access Server that also runs DNS or WINS:
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
> > When I restart the DNS services I get "The DNS Server
> > machine currently has no DNS domain nmae. Its DNS name
> > is a single label hostname with no domain (example:
> > "host" rather than "host.microsoft.com")"
> > It proceeds to tell me I may have failed to configure a
> > primary DNS domain for the server computer and I should
> > go to the Network Identification tab and change the
> > domain name.
> > The Network Identification tab is set properly.
> > When I try to reload the forward lookup zone that is the
> > same as my domain name, my SOA Primary server value only
> > has the server name. and not the domain attached to it.
> > Also, a Name Servers record is created with just the
> > server name and and IP address of Unknown. There is a
> > second name server listing that has the FQDN and the
> > correct IP Address.
> > I can manually go in and correct these settings but when
> > I reload the lookup zone they reset themselves.
> > Thank you,
> > Mark
>
> Can you post an unedited ipconfig /all please?
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email. ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
>
Related resources
Anonymous
August 4, 2004 1:49:01 AM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
Ipconfig /all reads as follows:
Local Area Connection
DHCP Enabled: No
IP Address: 192.168.1.2
Subner mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Servers: 192.168.1.2
Primary DNS Server: 192.168.1.2

PPP adapter RAS Server (Dial In) Interface:
DHCP Enabled: No
IP Address: 172.16.1.1
Subnet mask: 255.255.255.255
Deafult Gateway: <blank>
DNS Servers: 127.0.0.1

I have performed the steps in kb article 292822 - Name resolution and connectivity issues on a Routing and Remote Access Server that also runs DNS or WINS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822

Thanks,
Mark

"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:BFBC8C5A-DE67-40EE-AE15-ABF79BAF7D39@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> posted a question
> Then Kevin replied below:
> > Hello,
> > I have had a number of issues with my DNS srever. I am
> > running Small Biz Server 2000 with Win 2K server SP 4,
> > Exchange 2000 SP1. Everyting was working fine until I
> > tried to change the default IP address on our router
> > which is the DHCP provider. I am using RRAS on that
> > server and have performed the steps in 292822 - Name
> > resolution and connectivity issues on a Routing and
> > Remote
> > Access Server that also runs DNS or WINS:
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
> > When I restart the DNS services I get "The DNS Server
> > machine currently has no DNS domain nmae. Its DNS name
> > is a single label hostname with no domain (example:
> > "host" rather than "host.microsoft.com")"
> > It proceeds to tell me I may have failed to configure a
> > primary DNS domain for the server computer and I should
> > go to the Network Identification tab and change the
> > domain name.
> > The Network Identification tab is set properly.
> > When I try to reload the forward lookup zone that is the
> > same as my domain name, my SOA Primary server value only
> > has the server name. and not the domain attached to it.
> > Also, a Name Servers record is created with just the
> > server name and and IP address of Unknown. There is a
> > second name server listing that has the FQDN and the
> > correct IP Address.
> > I can manually go in and correct these settings but when
> > I reload the lookup zone they reset themselves.
> > Thank you,
> > Mark
>
> Can you post an unedited ipconfig /all please?
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email. ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
>
Anonymous
August 4, 2004 4:10:50 AM

Archived from groups: microsoft.public.win2000.dns (More info?)

In news:FE82DCA0-D24C-4E5A-8B41-33BB5EEF0F74@microsoft.com,
Markw911 <Markw911@discussions.microsoft.com> posted a question
Then Kevin replied below:
> Hello Kevin,
> Ipconfig /all reads as follows:
> Local Area Connection
> DHCP Enabled: No
> IP Address: 192.168.1.2
> Subner mask: 255.255.255.0
> Default Gateway: 192.168.1.1
> DNS Servers: 192.168.1.2
> Primary DNS Server: 192.168.1.2
>
> PPP adapter RAS Server (Dial In) Interface:
> DHCP Enabled: No
> IP Address: 172.16.1.1
> Subnet mask: 255.255.255.255
> Deafult Gateway: <blank>
> DNS Servers: 127.0.0.1
>
> I have performed the steps in kb article 292822 - Name
> resolution and connectivity issues on a Routing and
> Remote Access Server that also runs DNS or WINS:
> http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
>

Actually I needed to see the ipconfig /all unedited so I can see the primary
and connection DNS suffix.



--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
--
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your
issue. To respond directly to me remove the nospam. from my
email. ==========================================
http://www.lonestaramerica.com/
==========================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
Anonymous
August 4, 2004 1:31:01 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
Ipconfig /all reads as follows:
Local Area Connection
DHCP Enabled: No
IP Address: 192.168.1.2
Subner mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Servers: 192.168.1.2
Primary DNS Server: 192.168.1.2

PPP adapter RAS Server (Dial In) Interface:
DHCP Enabled: No
IP Address: 172.16.1.1
Subnet mask: 255.255.255.255
Deafult Gateway: <blank>
DNS Servers: 127.0.0.1

I have performed the steps in kb article 292822 - Name resolution and connectivity issues on a Routing and Remote Access Server that also runs DNS or WINS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822

Thanks,
Mark


"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:BFBC8C5A-DE67-40EE-AE15-ABF79BAF7D39@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> posted a question
> Then Kevin replied below:
> > Hello,
> > I have had a number of issues with my DNS srever. I am
> > running Small Biz Server 2000 with Win 2K server SP 4,
> > Exchange 2000 SP1. Everyting was working fine until I
> > tried to change the default IP address on our router
> > which is the DHCP provider. I am using RRAS on that
> > server and have performed the steps in 292822 - Name
> > resolution and connectivity issues on a Routing and
> > Remote
> > Access Server that also runs DNS or WINS:
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
> > When I restart the DNS services I get "The DNS Server
> > machine currently has no DNS domain nmae. Its DNS name
> > is a single label hostname with no domain (example:
> > "host" rather than "host.microsoft.com")"
> > It proceeds to tell me I may have failed to configure a
> > primary DNS domain for the server computer and I should
> > go to the Network Identification tab and change the
> > domain name.
> > The Network Identification tab is set properly.
> > When I try to reload the forward lookup zone that is the
> > same as my domain name, my SOA Primary server value only
> > has the server name. and not the domain attached to it.
> > Also, a Name Servers record is created with just the
> > server name and and IP address of Unknown. There is a
> > second name server listing that has the FQDN and the
> > correct IP Address.
> > I can manually go in and correct these settings but when
> > I reload the lookup zone they reset themselves.
> > Thank you,
> > Mark
>
> Can you post an unedited ipconfig /all please?
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email. ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
>
Anonymous
August 4, 2004 1:45:02 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
Sorry I chopped off that part. Please ignore any repeat posts you see from me. The site was telling me there was an error but I guess it was posting anyway.
Ipconfig /all reads as follows:

Windows 2000 IP Configuration
Host Name: SYNACT1
Primary DNS Suffix: SynACT.net
Node Type: Hybrid
IP Routing Enabled: Yes
WIS Proxy Enabled: No
DNS SUffix Search List: SynACT.net

Local Area Connection
DHCP Enabled: No
IP Address: 192.168.1.2
Subner mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Servers: 192.168.1.2
Primary DNS Server: 192.168.1.2

PPP adapter RAS Server (Dial In) Interface:
DHCP Enabled: No
IP Address: 172.16.1.1
Subnet mask: 255.255.255.255
Deafult Gateway: <blank>
DNS Servers: 127.0.0.1

I have performed the steps in kb article 292822 - Name resolution and connectivity issues on a Routing and Remote Access Server that also runs DNS or WINS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822

Thanks,
Mark

"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:FE82DCA0-D24C-4E5A-8B41-33BB5EEF0F74@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> posted a question
> Then Kevin replied below:
> > Hello Kevin,
> > Ipconfig /all reads as follows:
> > Local Area Connection
> > DHCP Enabled: No
> > IP Address: 192.168.1.2
> > Subner mask: 255.255.255.0
> > Default Gateway: 192.168.1.1
> > DNS Servers: 192.168.1.2
> > Primary DNS Server: 192.168.1.2
> >
> > PPP adapter RAS Server (Dial In) Interface:
> > DHCP Enabled: No
> > IP Address: 172.16.1.1
> > Subnet mask: 255.255.255.255
> > Deafult Gateway: <blank>
> > DNS Servers: 127.0.0.1
> >
> > I have performed the steps in kb article 292822 - Name
> > resolution and connectivity issues on a Routing and
> > Remote Access Server that also runs DNS or WINS:
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
> >
>
> Actually I needed to see the ipconfig /all unedited so I can see the primary
> and connection DNS suffix.
>
>
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email. ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
>
Anonymous
August 4, 2004 7:23:56 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

In news:918E2F90-AA91-4406-AFE9-16139D35C87E@microsoft.com,
Markw911 <Markw911@discussions.microsoft.com> wrote their comments
Then Kevin replied below:
> Hello Kevin,
> Sorry I chopped off that part. Please ignore any repeat
> posts you see from me. The site was telling me there was
> an error but I guess it was posting anyway.
> Ipconfig /all reads as follows:
>
> Windows 2000 IP Configuration
> Host Name: SYNACT1
> Primary DNS Suffix: SynACT.net
> Node Type: Hybrid
> IP Routing Enabled: Yes
> WIS Proxy Enabled: No
> DNS SUffix Search List: SynACT.net
>
> Local Area Connection
> DHCP Enabled: No
> IP Address: 192.168.1.2
> Subner mask: 255.255.255.0
> Default Gateway: 192.168.1.1
> DNS Servers: 192.168.1.2
> Primary DNS Server: 192.168.1.2
>
> PPP adapter RAS Server (Dial In) Interface:
> DHCP Enabled: No
> IP Address: 172.16.1.1
> Subnet mask: 255.255.255.255
> Deafult Gateway: <blank>
> DNS Servers: 127.0.0.1
>
> I have performed the steps in kb article 292822 - Name
> resolution and connectivity issues on a Routing and
> Remote Access Server that also runs DNS or WINS:
> http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822

Have you verified that the DNS proxy is disabled in RRAS?

That is in the RRAS console, expand IP Routing, right click on NAT,
Properties then on the name resolution tab. make sure the option to Resolve
IP addresses for clients is not checked.
Could you post or email me a list of the records in your forward lookup
zone? (right click on the open zone choose "Export list")

--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
--
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your
issue. To respond directly to me remove the nospam. from my
email.
==========================================
http://www.lonestaramerica.com/
==========================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
Anonymous
August 4, 2004 7:23:57 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
In the RRAS console under IP Routing I do not have NAT listed. I did not set up to use NAT when I set up RRAS. Also, most of my problems started when I thought the integrated NIC was bad and I installed a new one. I have since removed that NIC and gone back to the original integrated NIC.
Here is the export of my forward lookup zone:
Name Type Data
_msdcs
_sites
_tcp
_udp
(same as parent folder) Start of Authority [189], synact1., admin.synact.net.
(same as parent folder) Name Server synact1.
(same as parent folder) Name Server synact1.synact.net.
(same as parent folder) Host 192.168.1.2
(same as parent folder) Host 192.168.16.1
SYNACT1 Host 192.168.1.2

Thank you verey much for all your help,
Mark

"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:918E2F90-AA91-4406-AFE9-16139D35C87E@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> wrote their comments
> Then Kevin replied below:
> > Hello Kevin,
> > Sorry I chopped off that part. Please ignore any repeat
> > posts you see from me. The site was telling me there was
> > an error but I guess it was posting anyway.
> > Ipconfig /all reads as follows:
> >
> > Windows 2000 IP Configuration
> > Host Name: SYNACT1
> > Primary DNS Suffix: SynACT.net
> > Node Type: Hybrid
> > IP Routing Enabled: Yes
> > WIS Proxy Enabled: No
> > DNS SUffix Search List: SynACT.net
> >
> > Local Area Connection
> > DHCP Enabled: No
> > IP Address: 192.168.1.2
> > Subner mask: 255.255.255.0
> > Default Gateway: 192.168.1.1
> > DNS Servers: 192.168.1.2
> > Primary DNS Server: 192.168.1.2
> >
> > PPP adapter RAS Server (Dial In) Interface:
> > DHCP Enabled: No
> > IP Address: 172.16.1.1
> > Subnet mask: 255.255.255.255
> > Deafult Gateway: <blank>
> > DNS Servers: 127.0.0.1
> >
> > I have performed the steps in kb article 292822 - Name
> > resolution and connectivity issues on a Routing and
> > Remote Access Server that also runs DNS or WINS:
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q292822
>
> Have you verified that the DNS proxy is disabled in RRAS?
>
> That is in the RRAS console, expand IP Routing, right click on NAT,
> Properties then on the name resolution tab. make sure the option to Resolve
> IP addresses for clients is not checked.
> Could you post or email me a list of the records in your forward lookup
> zone? (right click on the open zone choose "Export list")
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email.
> ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
>
Anonymous
August 4, 2004 9:03:43 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

In news:99E1E099-34A2-46A9-9D95-D3F29BE2B2B1@microsoft.com,
Markw911 <Markw911@discussions.microsoft.com> wrote their comments
Then Kevin replied below:
> Hello Kevin,
> In the RRAS console under IP Routing I do not have NAT
> listed. I did not set up to use NAT when I set up RRAS.
> Also, most of my problems started when I thought the
> integrated NIC was bad and I installed a new one. I have
> since removed that NIC and gone back to the original
> integrated NIC.
> Here is the export of my forward lookup zone:
> Name Type Data
> _msdcs
> _sites
> _tcp
> _udp
> (same as parent folder) Start of Authority [189],
> synact1., admin.synact.net.
> (same as parent folder) Name Server synact1.
> (same as parent folder) Name Server synact1.synact.net.
> (same as parent folder) Host 192.168.1.2

> (same as parent folder) Host 192.168.16.1<---what is this IP for? Only DCs
should have a (same as parent folder) host record.

> SYNACT1 Host 192.168.1.2
>

The AD Domain name is synact.net?(in AD Users & Computers)

Verify that in
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, that
the value for Domain and NV Domain are both set to the AD Domain name.





--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
--
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your
issue. To respond directly to me remove the nospam. from my
email.
==========================================
http://www.lonestaramerica.com/
==========================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
Anonymous
August 5, 2004 12:51:02 AM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
The AD Domain name is SynACT.net
In the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, the values are as follows
Domain: SynACT.net
Hostname: SYNACT1
NameServer: <blank>
NV Domain: SynACT.net
NV Hostname: SYNACT1

I can manually change the SOA and Name Server records in DNS. However, when I reload the zone or restart the services, the values without the Domain name comeback. Also, after applying the registry changes named in the MS KB article you recommended I did not notice any changes in the DNS values after restarting the services. Don't know if this info helps but wanted to pass it along.
Thanks,
Mark

"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:99E1E099-34A2-46A9-9D95-D3F29BE2B2B1@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> wrote their comments
> Then Kevin replied below:
> > Hello Kevin,
> > In the RRAS console under IP Routing I do not have NAT
> > listed. I did not set up to use NAT when I set up RRAS.
> > Also, most of my problems started when I thought the
> > integrated NIC was bad and I installed a new one. I have
> > since removed that NIC and gone back to the original
> > integrated NIC.
> > Here is the export of my forward lookup zone:
> > Name Type Data
> > _msdcs
> > _sites
> > _tcp
> > _udp
> > (same as parent folder) Start of Authority [189],
> > synact1., admin.synact.net.
> > (same as parent folder) Name Server synact1.
> > (same as parent folder) Name Server synact1.synact.net.
> > (same as parent folder) Host 192.168.1.2
>
> > (same as parent folder) Host 192.168.16.1<---what is this IP for? Only DCs
> should have a (same as parent folder) host record.
>
> > SYNACT1 Host 192.168.1.2
> >
>
> The AD Domain name is synact.net?(in AD Users & Computers)
>
> Verify that in
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, that
> the value for Domain and NV Domain are both set to the AD Domain name.
>
>
>
>
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email.
> ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
>
Anonymous
August 5, 2004 4:55:44 AM

Archived from groups: microsoft.public.win2000.dns (More info?)

In news:FCD71E5A-B059-4171-9510-0BB767B42357@microsoft.com,
Markw911 <Markw911@discussions.microsoft.com> wrote their comments
Then Kevin replied below:
> Hello Kevin,
> The AD Domain name is SynACT.net
> In the
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters,
> the values are as follows
> Domain: SynACT.net
> Hostname: SYNACT1
> NameServer: <blank>
> NV Domain: SynACT.net
> NV Hostname: SYNACT1
>
> I can manually change the SOA and Name Server records in
> DNS. However, when I reload the zone or restart the
> services, the values without the Domain name comeback.
> Also, after applying the registry changes named in the MS
> KB article you recommended I did not notice any changes
> in the DNS values after restarting the services. Don't
> know if this info helps but wanted to pass it along.

Are you using AD integrated or Standard primary zone?
If you are using Standard Primary you need to delete the synact.net.dns file
in the system32\dns\backup folder.
And delete the NS record with only the host name.

And what about this record?
> (same as parent folder) Host 192.168.16.1<---what is this IP for? Only DCs
should have a (same as parent folder) host record.

You may find something here that will help you;
Windows 2000 DNS Resource Center:
http://support.microsoft.com/default.aspx?pr=win2000dns...

--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
================================================
--
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
================================================
http://www.lonestaramerica.com/
================================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
================================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
================================================
Anonymous
August 5, 2004 9:39:01 AM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hi Kevin,
This is an AD integrated zone.
I do not know why I have the record (same as parent folder) Host 192.168.16.1
I thought it may have gotten created when I set up RRAS. I would like to know where that is coming from and also the NameServer synact1.
My only Reverse Lookup Zone is 192.168.16.x Subnet and here are its values.
(same as parent folder) Start of Authority [15], synact1., admin.synact.net
(same as parent folder) Name Server synact1.
(same as parent folder) Name Server synact1.synact.net

Am I getting those strange values in the FLZ because of what is in the RLZ? I thought the 192.168.16.x was for RRAS. I do not have a RLZ for 192.168.1.x subnet. Should I?
Mark

"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:FCD71E5A-B059-4171-9510-0BB767B42357@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> wrote their comments
> Then Kevin replied below:
> > Hello Kevin,
> > The AD Domain name is SynACT.net
> > In the
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters,
> > the values are as follows
> > Domain: SynACT.net
> > Hostname: SYNACT1
> > NameServer: <blank>
> > NV Domain: SynACT.net
> > NV Hostname: SYNACT1
> >
> > I can manually change the SOA and Name Server records in
> > DNS. However, when I reload the zone or restart the
> > services, the values without the Domain name comeback.
> > Also, after applying the registry changes named in the MS
> > KB article you recommended I did not notice any changes
> > in the DNS values after restarting the services. Don't
> > know if this info helps but wanted to pass it along.
>
> Are you using AD integrated or Standard primary zone?
> If you are using Standard Primary you need to delete the synact.net.dns file
> in the system32\dns\backup folder.
> And delete the NS record with only the host name.
>
> And what about this record?
> > (same as parent folder) Host 192.168.16.1<---what is this IP for? Only DCs
> should have a (same as parent folder) host record.
>
> You may find something here that will help you;
> Windows 2000 DNS Resource Center:
> http://support.microsoft.com/default.aspx?pr=win2000dns...
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ================================================
> --
> When responding to posts, please "Reply to Group"
> via your newsreader so that others may learn and
> benefit from your issue, to respond directly to
> me remove the nospam. from my email address.
> ================================================
> http://www.lonestaramerica.com/
> ================================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ================================================
> Keep a back up of your OE settings and folders
> with OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ================================================
>
>
>
Anonymous
August 5, 2004 12:57:11 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

In news:CE85890A-F38B-420D-8979-AECB85821402@microsoft.com,
Markw911 <Markw911@discussions.microsoft.com> wrote their comments
Then Kevin replied below:
> Hi Kevin,
> This is an AD integrated zone.
> I do not know why I have the record (same as parent
> folder) Host 192.168.16.1
> I thought it may have gotten created when I set up RRAS.
> I would like to know where that is coming from and also
> the NameServer synact1.
> My only Reverse Lookup Zone is 192.168.16.x Subnet and
> here are its values.
> (same as parent folder) Start of Authority [15],
> synact1., admin.synact.net
> (same as parent folder) Name Server synact1.
> (same as parent folder) Name Server synact1.synact.net
>
> Am I getting those strange values in the FLZ because of
> what is in the RLZ?
Not likely, the forward zone can create reverse entries, but the reverse
zone cannot create forward entries.

I thought the 192.168.16.x was for
> RRAS.
RAS is 172.16.1.1, even if RAS was 192.168.16.x you don't want it registered
in DNS that's the point of the registry entries. The only (same as parent
folder) entry you want is for the private interfaces of your domain
controllers, if you have a domain controller on that address it is not this
one so, I don't know why it is there. Delete it, if it gets re-registered we
can figure out why, if it doesn't, that's OK too.

I do not have a RLZ for 192.168.1.x subnet.
> Should I?

Reverse DNS is not required but you can set up one if you want.

I'm not sure what the problem is at this point, DNS should not be creating
the NS record with just the hostname, all the settings seem to be correct.
I'll tell you what you can try re-installing the AD zone, i'll post the KB
below, follow it step by step to see if it clears this up, it may just be
bad data in AD doing this.
294328 - How to Reinstall a Dynamic DNS Active Directory- Integrated Zone
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q294328

--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
================================================
--
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
================================================
http://www.lonestaramerica.com/
================================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
================================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
================================================
Anonymous
August 5, 2004 12:57:12 PM

Archived from groups: microsoft.public.win2000.dns (More info?)

Hello Kevin,
I started looking in AD users and computers. For the SynACT.net domain, the Domain Controllers folder has 1 listing, SYNACT1. When I look at the properties of SYNACT1, the DNS Name is SYNACT1. It should be SYNACT1.Synact.net but the field is read only. Do you know how I can change that?
I have a test server that is Small Biz Server 2000 as well and its DNS Name is the FQDN.
Thanks,
Mark

"Kevin D. Goodknecht Sr. [MVP]" wrote:

> In news:CE85890A-F38B-420D-8979-AECB85821402@microsoft.com,
> Markw911 <Markw911@discussions.microsoft.com> wrote their comments
> Then Kevin replied below:
> > Hi Kevin,
> > This is an AD integrated zone.
> > I do not know why I have the record (same as parent
> > folder) Host 192.168.16.1
> > I thought it may have gotten created when I set up RRAS.
> > I would like to know where that is coming from and also
> > the NameServer synact1.
> > My only Reverse Lookup Zone is 192.168.16.x Subnet and
> > here are its values.
> > (same as parent folder) Start of Authority [15],
> > synact1., admin.synact.net
> > (same as parent folder) Name Server synact1.
> > (same as parent folder) Name Server synact1.synact.net
> >
> > Am I getting those strange values in the FLZ because of
> > what is in the RLZ?
> Not likely, the forward zone can create reverse entries, but the reverse
> zone cannot create forward entries.
>
> I thought the 192.168.16.x was for
> > RRAS.
> RAS is 172.16.1.1, even if RAS was 192.168.16.x you don't want it registered
> in DNS that's the point of the registry entries. The only (same as parent
> folder) entry you want is for the private interfaces of your domain
> controllers, if you have a domain controller on that address it is not this
> one so, I don't know why it is there. Delete it, if it gets re-registered we
> can figure out why, if it doesn't, that's OK too.
>
> I do not have a RLZ for 192.168.1.x subnet.
> > Should I?
>
> Reverse DNS is not required but you can set up one if you want.
>
> I'm not sure what the problem is at this point, DNS should not be creating
> the NS record with just the hostname, all the settings seem to be correct.
> I'll tell you what you can try re-installing the AD zone, i'll post the KB
> below, follow it step by step to see if it clears this up, it may just be
> bad data in AD doing this.
> 294328 - How to Reinstall a Dynamic DNS Active Directory- Integrated Zone
> http://support.microsoft.com/default.aspx?scid=kb;en-us;Q294328
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ================================================
> --
> When responding to posts, please "Reply to Group"
> via your newsreader so that others may learn and
> benefit from your issue, to respond directly to
> me remove the nospam. from my email address.
> ================================================
> http://www.lonestaramerica.com/
> ================================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ================================================
> Keep a back up of your OE settings and folders
> with OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ================================================
>
>
>
!