Socket 478 3.0E VCore

[mjstaib]

How would I raise the VCore on this processor? I've gotten it up stably to ~3.5 GHz by raising the FSB and using ClockGen, but I can't figure out how to raise the voltage. I've got Biostar's crappy WarpSpeeder program, but the overclocking and voltage buttons are locked

 

[dougie_boy]

your going to have to get your hands dirty in the bios mate.

windows OC isnt real OCing,
its the girlly stuff..

go find your feet in the BIOS. check the stickes for advice.

 

[mjstaib]

I would use the BIOS but won't let me change clock multiplier or VCore. Changing the FSB alone can only get me 3.48 GHz max.

 

[dougie_boy]

update the bios from the manufactures web site. check the forums for ur board. you might be able to volt mod it...

 

[mjstaib]

Not much luck on the forums, and the last time Biostar upgraded the BIOS on my mobo was several months before I got it.

 

[1Tanker]

I would use the BIOS but won't let me change clock multiplier or VCore. Changing the FSB alone can only get me 3.48 GHz max.

You'll never be able to change the multiplier, and if there's no provision in the BIOS for vCore increases, then you're stuck....unless someone has a volt-mod for it. GL

 

[darkstar782]

I know there are conductive ink pinmods for the voltage on LGA775 CPUs but I think you are out of luck with a S478