Archived from groups: microsoft.public.pocketpc (More info?)
Sorta-Kinda. To connect and use a headset, you need to have access to the
headset profile in the BT system. You'll note that headset is not one of
the options on the connection wizard. Some PPCs actually support the
headset profile, but it is hidden. The 2210 happens to be one of those. You
will need to make a registry tweak, and then Headset will show up in the BT
manager when you go to add a device.
The info is
HKLM\SOFTWARE\Widcomm\BtConfig\Services\0005\Enabled
Change value to 1.
HKLM\Drivers\BuiltIn\WaveDev\Dll
Change value to BtCeIf.dll
Reset device,
Run bluetooth manager and connect to headset.. partner.
right(hold) click and connect
When it gets connected, you will hear a beep from the headset like you are
getting a call. Answer.
AFter that, all the sound will be routed to the headset.
--
Sven, MS-MVP Mobile Devices
"toedipper" <send_rubbish_here734@hotmail.com> wrote in message
news:34jaasF4ad4c5U2@individual.net...
> Hello,
>
> Does anyone know if a mobile phone compatible bluetooth headset can
receive
> the sound output from a bluetooth pocket pc such as my HP Ipaq 2210?
>
> Or maybe should I ask the question the other way around if you get my
drift!
>
> Thanks,
>
> td
>
>
>
Archived from groups: microsoft.public.pocketpc (More info?)
Does anyone know if this tweak works on the i700?
In a thread recently someone had mentioned that the bluetooth sdio cards
don't support the headset. I'm wondering if perhaps that information was
based on the device not being listed as you mention below.
"Sven, MVP-Mobile Devices" <sejohannsen@hotmail.com> wrote in message
news:uX9CZbE%23EHA.4028@TK2MSFTNGP15.phx.gbl...
> Sorta-Kinda. To connect and use a headset, you need to have access to the
> headset profile in the BT system. You'll note that headset is not one of
> the options on the connection wizard. Some PPCs actually support the
> headset profile, but it is hidden. The 2210 happens to be one of those.
> You
> will need to make a registry tweak, and then Headset will show up in the
> BT
> manager when you go to add a device.
>
> The info is
> HKLM\SOFTWARE\Widcomm\BtConfig\Services\0005\Enabled
>
> Change value to 1.
>
> HKLM\Drivers\BuiltIn\WaveDev\Dll
>
> Change value to BtCeIf.dll
>
> Reset device,
> Run bluetooth manager and connect to headset.. partner.
> right(hold) click and connect
> When it gets connected, you will hear a beep from the headset like you are
> getting a call. Answer.
> AFter that, all the sound will be routed to the headset.
>
> That was copied from a thread at
> http://discussion.brighthand.com/s [...] et+profile >
> --
> Sven, MS-MVP Mobile Devices
> "toedipper" <send_rubbish_here734@hotmail.com> wrote in message
> news:34jaasF4ad4c5U2@individual.net...
>> Hello,
>>
>> Does anyone know if a mobile phone compatible bluetooth headset can
> receive
>> the sound output from a bluetooth pocket pc such as my HP Ipaq 2210?
>>
>> Or maybe should I ask the question the other way around if you get my
> drift!
>>
>> Thanks,
>>
>> td
>>
>>
>>
>
>
Archived from groups: microsoft.public.pocketpc (More info?)
On Wed, 12 Jan 2005 00:46:20 -0000, "toedipper"
<send_rubbish_here734@hotmail.com> wrote:
>Hello,
>
>Does anyone know if a mobile phone compatible bluetooth headset can receive
>the sound output from a bluetooth pocket pc such as my HP Ipaq 2210?
>
>Or maybe should I ask the question the other way around if you get my drift!
>
>Thanks,
>
>td
>
>
I'm using a very cheap Bluetooth headset for a mobile phone with the
Ipaq 4700 and it works perfectly. It was bought at Aldi in the U.K.
so I doubt it is available outside Europe.
Dave G
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.