Archived from groups: comp.dcom.lans.ethernet,comp.dcom.sys.bay-networks,comp.dcom.lans.misc,comp.dcom.sys.cisco,comp.dcom.sys.nortel (More info?)
A blast from the past to be sure...
Does anyone know what the default login ID and password is for these
switches? I have aquired one and have console access...
************************************************************
Packet Engines PowerRail 1000
Version 2.0.0r22 - 2 Feb, 1999
Copyright(c) 1997-1998 Packet Engines, Inc.
Spokane, Washington, USA
All rights reserved.
System MAC Address: 00:xx:xx:xx:xx:xx
************************************************************
Current Time: Apr 25, 2005 14:02
Was able to boot with no config by powering up and typing any key...
# Date Time Vers Size Name
1 2003-02-07 09:03:27 2.0.0r22 3027 startup.config
Select a configuration file by number,
or enter "0" for none,
or ESC to return to the previous menu: 0
Enter one of the following options:
'C' to select the EMM configuration file [*none*]
'D' to start Xmodem download [-]
'I' to select an EMM image to run [PR1000.sys]
'S' to set option for the serial BAUD rate [9600]
'ESC' to continue startup
Your choice:
[Selected config file is "*none*"]
[Invoking EMM image "PR1000.sys" from Onboard flash]
gEMM_SEEPROM.flash_size = 0x0080
[EMM image started (boot: is Onboard flash)]
[EMM MAC address: 00-xx-xx-xx-xx-xx]
Thanks in advance... Angler
A blast from the past to be sure...
Does anyone know what the default login ID and password is for these
switches? I have aquired one and have console access...
************************************************************
Packet Engines PowerRail 1000
Version 2.0.0r22 - 2 Feb, 1999
Copyright(c) 1997-1998 Packet Engines, Inc.
Spokane, Washington, USA
All rights reserved.
System MAC Address: 00:xx:xx:xx:xx:xx
************************************************************
Current Time: Apr 25, 2005 14:02
Was able to boot with no config by powering up and typing any key...
# Date Time Vers Size Name
1 2003-02-07 09:03:27 2.0.0r22 3027 startup.config
Select a configuration file by number,
or enter "0" for none,
or ESC to return to the previous menu: 0
Enter one of the following options:
'C' to select the EMM configuration file [*none*]
'D' to start Xmodem download [-]
'I' to select an EMM image to run [PR1000.sys]
'S' to set option for the serial BAUD rate [9600]
'ESC' to continue startup
Your choice:
[Selected config file is "*none*"]
[Invoking EMM image "PR1000.sys" from Onboard flash]
gEMM_SEEPROM.flash_size = 0x0080
[EMM image started (boot: is Onboard flash)]
[EMM MAC address: 00-xx-xx-xx-xx-xx]
Thanks in advance... Angler