Serial ATA timeout problems on Win 2000 server

[Guest]

Archived from groups: microsoft.public.win2000.file_system (More info?)

Hi,

Im having a bit of a problems with one of my windows 2000 servers. I
am running a adaptec 1210 SATA raid controller card with two SATA
drives.

I keep getting timeout errors when i am running a backup on the
machine. This leads to the server hanging and requiring a reboot. I
get the following error in the event log and eventually the server
crashes!

The device, \Device\Scsi\aar12101, did not respond within the timeout
period.

I have run the build and verify check within the adaptec browser
software and the drives appear to be fine.

Anyone any tips as i dont know what else to try!

 

[Guest]

Archived from groups: microsoft.public.win2000.file_system (More info?)

Cross-post when necessary, but never multi-post. Cross-posting is when you
include two or more groups in the "Newsgroups:" section. In this scenario
the message and all responses are seen in all groups that the message was
cross-posted to. In other words any replies will automatically propagate to
the other newsgroup posts.

Multi-posting is when you post the same message to two or more groups
individually. In this scenario the message is seen in the groups it is
posted to, but the responses are only seen attached to the message (unless
you cross-post the reply) in which the response was made. So those that
frequent these groups then need to deal with or re-read the posts. It may
seem like a small thing to keep track of. But some of us actively traverse
50 or more groups. The poster also then must search out all of the posts to
see if there was a response.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"foxy1977" wrote:
| Hi,
|
| Im having a bit of a problems with one of my windows 2000 servers. I
| am running a adaptec 1210 SATA raid controller card with two SATA
| drives.
|
| I keep getting timeout errors when i am running a backup on the
| machine. This leads to the server hanging and requiring a reboot. I
| get the following error in the event log and eventually the server
| crashes!
|
| The device, \Device\Scsi\aar12101, did not respond within the timeout
| period.
|
| I have run the build and verify check within the adaptec browser
| software and the drives appear to be fine.
|
| Anyone any tips as i dont know what else to try!
|