voltage ok

[sean00]

Does this readout look okay to anyone ? I bumped up my fsb a while back and have been constantly monitoring my computer.

+-------------------------------------------------------------------------+
|Total number of readouts: 44 CPU Speed: 3415 MHz |
|Running from: 9/21/2006 2:40:09 AM until: 9/21/2006 2:43:24 AM |
+-----------------------------+----------+----------+----------+----------+
|Sensor | Current | Low | High | Average |
+-----------------------------+----------+----------+----------+----------+
|Sensor 1 | 0° C | 0° C | 0° C | 0° C |
|CPU | 38° C | 35° C | 41° C | 36° C |
|Sensor 3 | 0° C | 0° C | 0° C | 0° C |
|Sensor 4 | 0° C | 0° C | 0° C | 0° C |
|Core 0 | 1.20 V | 1.20 V | 1.36 V | 1.24 V |
|Core 1 | 1.14 V | 1.14 V | 1.14 V | 1.14 V |
|+3.3 | 3.34 V | 3.33 V | 3.38 V | 3.35 V |
|+5.00 | 6.08 V | 6.05 V | 6.11 V | 6.08 V |
|+12.00 | 11.97 V | 11.71 V | 11.97 V | 11.89 V |
|-12.00 | 2.75 V | 2.75 V | 2.75 V | 2.75 V |
|-5.00 | 1.12 V | 1.12 V | 1.12 V | 1.12 V |
|Fan 1 | 0 RPM | 0 RPM | 0 RPM | 0 RPM |
|Fan 2 | 1344 RPM | 1344 RPM | 1355 RPM | 1350 RPM |
|Fan 3 | 0 RPM | 0 RPM | 0 RPM | 0 RPM |
+-----------------------------+----------+----------+----------+----------+

Seems like some of the voltages are to high ?
Thanks in advance

 

[fainis]

|Core 0 | 1.20 V | 1.20 V | 1.36 V | 1.24 V |
|Core 1 | 1.14 V | 1.14 V | 1.14 V | 1.14 V |

ihmmmmmm..it looks like you have the second core in idle and the first one ...hmmmmmmm......

try to disable EIST, or any thermal monitor you may have enabled in bios...
only then you must ensure the stability of the sistem after OC-ing

the voltages are ok ..at least you should not worried about them.......
5V look ok.....not to worry if it`s looks a little high ... most probable you have a pci-express platform........12V look ok...it`s normal to be a little low....most of the components use the 12V rail so it`s normal.....

i don``t think you should worry about voltages and psu related ..unless your sistem becames instable ...restarts ..and unexpected hangs.....

good luck

 

[darkstar782]

|+5.00 | 6.08 V | 6.05 V | 6.11 V | 6.08 V |

Your +5v is running over 20% overvoltage according to that, while the ATX spec calls for ±5% (or 4.75-5.25v)

Thats kinda worrying but I would check the reading is accurate with a multimeter as its rare for a PSU to run that far *over* voltage.

 

[sean00]

The +5v was one I had noticed before.
This is a readout from BIOS - and its a little different

CPU Vcore 1.31v
FSB_VTT 1.16v
+3.3V 3.34v + 2
+5V 5.10v+ 2
12V 11.84V
5VSB 5.08V
CPU 41*C SYSTEM TEMP 32*C

Is System temp the case temp or what ?
This doesnt look as bad as what MotherBoardMonitor is showing.

 

[darkstar782]

Yup that looks fine and I wouldnt worry about it, you have just shown how inaccurate these damn things can be

System temp is either a thermal diode located on a random point on the motherboard, or the temperature of the northbridge. Either way, its well within acceptable limits.