Windows 7 Home Premium Constanly Restarting at Windows Logo Screen

Hello,

I'm having some trouble with my home built computer, with Windows 7 home premium OS. When my computer reaches the the windows 7 logo screen, after a couple seconds a blue screen flashes for about half a second and then my computer resets constantly. I have had issues with starting up the computer in the past but now it's really bad. I tryed to do a system restore but an error comes up with the numbers 0x80070057 on it. I would give you the blue screen number buts it's litterally impossible to see.
I have tryed unplugging all usb devices.
Unplugging cd drive, extra hard drives
Taking out extra ram (from 8gb to 4gb)
I havn't had any problems with my self built computer for about a year until now. It works great, just has trouble starting. I have tryed many basic soultions to try to fix it and nothing worked! I am completely clueless, if I could get some advice on how to fix this it would be very much appreciated. Thanks!
4 answers Last reply
More about windows home premium constanly restarting windows logo screen
  1. I would be looking at your RAM.
    What RAM are you using? what voltage is it manufactured to run at?
    what is your BIOS set to?
    run Memtest over night.
  2. OCZ Obsidian 4GB (2 x 2GB)
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820227495

    ADATA XPG Gaming Series 4GB (2 x 2GB)\
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820211409

    ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard
    http://www.newegg.com/Product/Product.aspx?Item=N82E16813131402

    XION PowerReal AXP-850R14N 850W ATX 12V v2.2 / EPS 12V v2.91 SLI Ready CrossFire Ready Power Supply
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817190024

    I have ran that mem check. nothing happend.
  3. Could be failing memory or hdd (<--MY CHOICE).

    Could also be that the registry has reach its maximum size, I know it sounds daft but get into safe mode and increase size of virtual memory.
  4. Have you changed your SATA mode lately? Ive seen this typically happen when a user switches their SATA mode in the BIOS i.e. from Legacy IDE to AHCI, without provisioning properly in the OS.

    This used to be pretty much impossible without an OS reinstall in XP, but in Win 7 you can change a registry value so that the OS can account for the change.
Ask a new question

Read More

Windows 7 Computers Product