PIX 501 config question

Hi all,

I'm not sure if this is a suitable place to ask this, but here goes...

I have a PIX501 which I think should be working correctly but I need an independent opinion. My suspicion is that the PIX is fine and that it is the external routing that needs fixing.

Can anyone give me an opinion on whether this should let any traffic through? There is a software firewall installed on my webserver so I am happy for the PIX to be very insecure right now - I just want to get it to work at all :-)

Outside:
Interface: 212.130.214.10
Mask: 255.255.255.252
Gateway: 212.130.214.9

Inside:
Interface: 212.130.215.193
Mask: 255.255.255.192
Gateway: 212.130.215.193

I have changed some specifics below to protect the innocent.

Result of firewall command: "write term"

Building configuration...
: Saved
:
PIX Version 6.3(4)
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password aaaaa encrypted
passwd bbbbb encrypted
hostname ccccc
domain-name ddddd.com
clock timezone GMT/BST 0
clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00
no fixup protocol dns
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name xxx.xxx.xxx.xxx XXXXX
name yyy.yyy.yyy.yyy YYYYY
access-list outside_access_in permit icmp any any
access-list outside_access_in permit tcp any any
access-list outside_access_in permit udp any any
pager lines 24
logging on
logging history debugging
icmp permit any outside
icmp permit any inside
mtu outside 1500
mtu inside 1500
ip address outside 212.130.214.10 255.255.255.252
ip address inside 212.130.215.193 255.255.255.192
ip verify reverse-path interface outside
ip verify reverse-path interface inside
ip audit info action alarm
ip audit attack action alarm
pdm location XXXXX 255.255.255.240 outside
pdm location YYYYY 255.255.255.240 outside
pdm location zzz.zzz.zzz.zzz 255.255.255.0 outside
pdm logging debugging 500
pdm history enable
arp timeout 14400
nat (inside) 0 212.130.215.192 255.255.255.192 0 0
static (inside,outside) 212.130.215.192 212.130.215.192 netmask 255.255.255.192 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 212.130.214.9 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
aaa authorization command LOCAL
ntp server xxx.xxx.xxx.xxx source outside prefer
http server enable
http AAAAA 255.255.255.240 outside
http BBBBB 255.255.255.240 outside
http 212.130.193.0 255.255.255.0 outside
http 212.130.215.192 255.255.255.192 inside
no snmp-server location
no snmp-server contact
snmp-server community EEEEE
no snmp-server enable traps
floodguard enable
telnet AAAAA 255.255.255.240 outside
telnet 212.130.193.0 255.255.255.0 outside
telnet 212.130.215.192 255.255.255.192 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
username iiiii password iiiii encrypted privilege 3
username jjjjj password jjjjj encrypted privilege 15
username kkkkk password kkkkk encrypted privilege 5
privilege show level 0 command version
privilege show level 0 command curpriv
privilege show level 3 command pdm
privilege show level 3 command blocks
privilege show level 3 command ssh
privilege configure level 3 command who
privilege show level 3 command isakmp
privilege show level 3 command ipsec
privilege show level 3 command vpdn
privilege show level 3 command local-host
privilege show level 3 command interface
privilege show level 3 command ip
privilege configure level 3 command ping
privilege show level 3 command uauth
privilege configure level 5 mode enable command configure
privilege show level 5 command running-config
privilege show level 5 command privilege
privilege show level 5 command clock
privilege show level 5 command ntp
privilege show level 5 mode configure command logging
privilege show level 5 command fragment
terminal width 80
Cryptochecksum:zzzzz
: end
[OK]