E6400 and Memory Timings

[kintaro]

I'm some what new to overclocking and here is what I am getting right now -
E6400 @ 3.16 Ghz with 1.275 v
Corsiar XMS DDR2 800 2x512MB 6400C5 - 5-5-5-15 1.9v (manual setting)
Ratio 1:1
Temps = 30 C / idle, 50 C/ full load

I've ran two instances of Prime95 and ran stable with no errors.
I'm able to run 3dmark05 and 3dmark06 fine.
I'm getting a CPU Score of 2724 (which I think is good) on 3dMark06.

I want to make sure my memory is performing at its best, do these timings look good? Is there anything else I should try tweaking?

I appreciate any thoughts, thanks!


My Specs:
E6400 @ 3.16 Ghz with 1.275v
Corsiar XMS DDR2 800 2x512MB 6400C5 - 5-5-5-15 v1.9 (manual setting)
Gigabyte 965P-S3 (F5 Bios)
Sapphire ATI X850XT 560/1160
WD SATA II - 160GB & WD SATA II - 80 GB
Artic Pro 7 Cooler HeatSink/Fan
Antec SmartPower 500W PSU

 

[rwaritsdario]

Set vCORE @ 1.4v and vDIMM @ 2.2v keep pushing the FSB up until your full load temps reach ~60c
Youll hit at least 3.3Ghz if not much higher.