Setting up a web server with Netgear WGT 624 and Netgear 632

Archived from groups: (More info?)

Hi all!

I've been using since last year a wireless router Netgear WGT 624 with
an ADSL modem Netgear 632. My Lan is made with 2 PCs.
I had some trouble configuring it some time ago but after that
everything worked fine with an excellent connection.

Now I've been thinking of putting up a web server at home using the
sites that let to use dynamic DNS.

I was trying to test my configuration to see if it was working fine
before registering to one of these services. I installed Tomcat on my
main PC. Locally I can see it. Then I set a port forwarding on the
router (624) for HTTP pointing it to the PC where Tomcat is installed
and running. When I try to call from a web browser the dynamic IP
address that my ISP is giving me in that moment, I see the admin page
of the modem (632). It is like the router forwarding isn't working at
all and the modem is answering to that request.

These are the router and modem configuration:

Netgear ADSL Modem DG632
------------------------
Encapsulation PPPoE
DNS Servers Primary 193.70.192.25
DNS Servers Primary 193.70.152.25
Multiplexing Method LLC-BASED
VPI 8
VCI 35
Connect Automatically, as required TRUE
Disable Port Scan and DOS Protection FALSE
Default DMZ Server FALSE
Respond to Ping on Internet WAN Port FALSE
MTU Size 1492
IP Address 192.168.1.1
IP Subnet Mask 255.255.255.0
RIP Direction None
RIP Version RIP-2M
Use Router as DHCP Server FALSE
Device Mode DG632(Router)


Netgear WGT624
--------------
Use Static IP Address
IP Address 192.168.1.2
IP Subnet Mask 255.255.255.0
Gateway IP Address 192.168.1.1
Use these DNS Servers TRUE
Primary DNS Servers 192.168.1.1
Enable Wireless Router Radio TRUE
Enable SSID Broadcast TRUE
Fragmentation Threshold 2346
CTS/RTS Threshold 2346
Preamble Mode AUTOMATIC
Port Forwarding
FTP Port 21 - 21 192.168.0.2
HTTP Port 80 - 80 192.168.0.2
Connect Automatically as Required TRUE
Disable SPI Firewall FALSE
Default DMZ Server FALSE
Respond to Ping on Internet Port TRUE
MTU Size 1500
LAN IP SETUP
IP Address 192.168.0.1
IP Subnet Mask 255.255.255.0
RTP Direction None
RIP Version DISABLED
USE Router as DHCP Server
Starting IP address 192.168.0.2
Ending IP Address 192.168.0.25

What I'm doing wrong? What should I do to make it working? Thanks a lot
in advance!!! I'm getting made trying to configure it up.

mario