Need help OC core 2 duo E6600

[Qui-angel]

Having trouble over clocking my E6600 core 2 duo
I got a Gigabyte GA-965p-DS4
Ram:2Gb PC2-6400 DDR2-800 4-4-4-12 ATI Certfified Dual Channel kit
Had help from rwaritsdario but had no success

Basically once i attempt to overclock the Fsb i get to this bit and then i reboot back to default


These are the setting we have tried



I had the host control enabled but when it resets it goes back to disabled


Have also tried 280FSB just with +0.3 vDIMM
For cooling i got the bigwater 735 with aquabay M1 a+ M2

 

[Assman]

the first thing i noticed your tRAS is 5, thats way too low, try something like 15

 

[rivalneighbour]

nice of you to post pics of your bios. thats cool

 

[Qui-angel]

Ive changed tRAS to 15 and attempted higher still same problem
and disabled the tm2 still got the problem

 

[Qui-angel]

Just noticed after the reboot i get a DDR18V fail in the pc health status after rebooting from the first picture

 

[Qui-angel]

How does the water block make me reboot? if the temperature looks ok
also forgot to mention i was able to overclock the cpu with easytune5 to about 3ghz stable
I aslo ran the part 5 stabability test

 

[rivalneighbour]

your pic says your.
pci express frequency is set to auto.
See if you can manually set it to 33.

I did find a E6600 overclock database(one of many on the internet) but this one is pretty nice. I think it will give you an idea on what similar settings are and to see that the average was 3,384mhz oc for the E6600.
http://www.hardforum.com/printthread.php?t=1075792

 

[Qui-angel]

Ive been setting the pci express frequency to 100 but when it reboots it goes back to auto
Thank for the link ill take a look

 

[Qui-angel]

I have just moved the waterblock and will try Part5. Stability Testing again at stock

 

[Qui-angel]

Dam so stupid i thought itll be something like that
ill update the bios and tell you the good news XD

 

[Qui-angel]

Its Oc fine now XD got it to 3.3 stable at the moment

 

[Qui-angel]

Having trouble overclocking higher than 333 FSB im not sure how much to add with the 1FSB:1Ram from the guide maybe thats the problem?

Ive tried changing voltages up a notch also tried changing the time to 5-6-6-15

 

[Qui-angel]

anyone ?

 

[Qui-angel]

Am now having blue screen with those settings :/

 

[Qui-angel]

When i was using memtest i was getting memory error cannot accurately store data in ram
Yea using F6 now and i dont see F7b bios on there site :/

350-400 gets me the same error with memtest ram is @4-4-4-12

Attempted upping voltages up a notch + done what you suggested

 

[Qui-angel]

anyone knows whats wrong?

 

[Qui-angel]

Bump