How do i set Multiplier in BIOS

[AKJ]

I own a P5W DH Deluxe..
Would just like to know where to find the multiplier setting in the BIOS
I plan to set my FSB to 333 and the multiplyer to 8. Will this be better than the default of 266 * 9? How about 266 * 10? What would the best setting be?

Also, will this be a safe OC? I'll be using stock cooling..

Thanks for any advice

 

[apache_lives]

I own a P5W DH Deluxe..
Would just like to know where to find the multiplier setting in the BIOS
I plan to set my FSB to 333 and the multiplyer to 8. Will this be better than the default of 266 * 9? How about 266 * 10? What would the best setting be?

Also, will this be a safe OC? I'll be using stock cooling..

Thanks for any advice

update to the latest bios, its in the cpu configuration area

my e6600 with stock vcore and cooling will easily go to 400x8 (3200) - stock vcore for everything bar ram.

 

[AKJ]

I know where to find the FSB setting, but i dont see the multplier setting though, was it under the same menu?

 

[GrimReaperGuy]

No, the FSB configuration is in a different menu.
You may adjust the multiplier by going to the "CPU Configuration" menu, as the last poster stated. You must then select "Enable Ratio Adjust" or something along those lines, and then you may adjust the multiplier for your CPU.
Note: This was only added in a later BIOS release. If your BIOS does not as set support this, update it to the latest BIOS.

 

[AKJ]

OK, cool.. I have the BIOS Version 1407. Which is the latest release..
Thanks for the help