I have a core 2 duo e6600 with an asus p5 deluxe 1gb ddr2 800 and zalman s9500.
I am trying to overclock the cpu but once i reach about 3.00 i have my vcore at 1.425 and fsb at 1.4 and mch at 1.55.Ram is set to 1:1 ratio.Temps at load are in mid 40's.But whne i went up to 380 fsb my vcore was at 1.500 and my system was not stable.WHy?
I have to raise my vcore so much for a little overclock.
I didnt even pass the 400 fsb.
And accoring to this chart with a 1.500 vcore i should reach 3.6.And yes i know every system is diffrent but do i have something mabye set wrong.
http://www.hardforum.com/showthread.php?t=1075792
I am trying to overclock the cpu but once i reach about 3.00 i have my vcore at 1.425 and fsb at 1.4 and mch at 1.55.Ram is set to 1:1 ratio.Temps at load are in mid 40's.But whne i went up to 380 fsb my vcore was at 1.500 and my system was not stable.WHy?
I have to raise my vcore so much for a little overclock.
I didnt even pass the 400 fsb.
And accoring to this chart with a 1.500 vcore i should reach 3.6.And yes i know every system is diffrent but do i have something mabye set wrong.
http://www.hardforum.com/showthread.php?t=1075792