Rob423

Distinguished
Feb 5, 2002
2,809
0
20,810
I just build. And go No Video.


System Specs.

A8N DeLuxe
Athlon 64 3700+
BFG 7600GT OC
Thermaltake 430w PSU


All fans spin. Getting no Video. All drives getting power HSF spinning, Gfx Card spinning.

Not using SLI.. just a single PCI-e x16.

Please give me a few things to check.

I tried VGA, DVI cable, diff monitor. Everything is brand new just came today.

Like i said video is showing "NO Signal" on the monitor.
Motherboard "Green Light" is lit.




The motherboard has this power connecter.. sorta like a Hard Drive power Connector. I tried it connected and Not connected still no video.

my psu is this..

Model
Brand Thermaltake
Model W0070RUC
Series TR2
SPEC
Type ATX
Maximum Power 430W
Fans 2
PFC No
Main Connector 20+4-Pin
Dual +12V No
SLI Support No
Modular Cabling Support No
Hold-up Time 16ms min.
Efficiency > = 65%
Over Voltage Protection +5V trip point < +7.0V, +3.3V trip point < +4.5V, +12V trip point < +15.6V
Input Voltage 115/230 V
Input Frequency Range 47 - 63 Hz
Input Current 9A @ 115V, 5A @ 230V
Output +3.3V@20A, +5V@30A, +12V@18A, -5V@0.5A, -12V@0.8A, +5VSB@2A
Features
Connectors 1 x Main connector (20+4 pin)
1 x 12V (P4)
9 x peripheral
2 x SATA
2 x Floppy
1 x PCI-E
Features Dual 8cm fan, Intelligent Black Cable Sleeving
 

Rob423

Distinguished
Feb 5, 2002
2,809
0
20,810
WOW.. im such a fool.

i didn't realize this god damn board has 3 DAMN POWER CONNECTORS!


i only was using 2, i missed the small 4 pin connectors.

jesus when the hell did motherboard require 3 POWER CONNECTORS