TAT says I have a pentium m?? Tags: CPUs Pentium Intel Last response: November 19, 2006 3:41 PM in CPUs Share mickeddie November 18, 2006 11:40:09 PM Intel's thermal analysis tool says I have a pentium m. Is this normal for the program? More about : tat pentium skud November 19, 2006 3:41:02 PM well as long as your proc works like it should, then its fine, and yes that is normal but i dont know why Can't find your answer ? Ask ! Publish Related resources: ForumTAT vs. speedfan inconsistencies between cores Forumwhat must i trust ? speedfan temp or tat , core temp ? ForumIntel pentium M temp monitor ForumTAT for Q6600 ForumPentium M Centrino switching frequency ForumTAT C2D ForumAnyone have issues with the DS3 and intel TAT reading high? ForumFinding Tcase/Tjunction if TAT doesn't work ForumHELP CPU: CoreTemp: 33C - TAT : 50C - FD: 27C - ET: 59C ForumcoreTemp, TAT and ET5 about temperature monitors ForumSpeedFan 4.32 VS TAT ForumIntel TAT Error ForumTAT reading too high I hit 97C before throttling, got toasty ForumSpeedfan, Tcase, Tjunction setup and TAT on a GA-965P-DS3 ForumE6300 idel temp is 52C with TAT and core temp beta ForumWhy overclock my brother says .. ForumDriverGuide says my i5 is a Pentium III Xeon processor ForumPentium D 3.4 Heat Problem ForumPentium D 915 OEM HSF High Idle Temp ForumCoolerMaster V8 clicking/flapping More resources Read discussions in other CPUs categories AMD Intel Intel i5 Intel i7 Phenom Cooling Performance !