ddr2 800 on Intel D945GNT ?

[jkis]

I have the Intel D945GNT motherboard.

In ther brochure say:

Support for an Intel® Pentium® D Processor in an LGA775 socket with an 800 MHz system bus
Four 240-pin DDR2 SDRAM DIMM sockets
Support for DDR2 667, DDR2 533, or DDR2 400 MHz DIMMs
Support for up to 4 GB of system memory

May I use " CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory "

The DDR2 800 is very new, probably that's why they didn't put in the brochure.

Somebody can help me ? I want to buy this this memory and a Intel C2D E6300.

Thank you so much!

Juan

 

[qcmadness]

I have the Intel D945GNT motherboard.

In ther brochure say:

Support for an Intel® Pentium® D Processor in an LGA775 socket with an 800 MHz system bus
Four 240-pin DDR2 SDRAM DIMM sockets
Support for DDR2 667, DDR2 533, or DDR2 400 MHz DIMMs
Support for up to 4 GB of system memory

May I use " CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory "

The DDR2 800 is very new, probably that's why they didn't put in the brochure.

Somebody can help me ? I want to buy this this memory and a Intel C2D E6300.

Thank you so much!

Juan

945 series do not support 1066MHz FSB / DDR2-800 Ram configuration.

 

[pausert20]

Sorry, but the only older chipset that has the VRM11 is the board code named Coryville. If you want to stay with an Intel Board in the uATX formfactor I would recommend the following:

Stoughton - DG965OT (Viiv)
Shrewsbury - DG965SS

Cheaper one would be this:
Isleton - D946GZIS