E6600 with DDR2-800 CL4-4-4-12 and P5W DH Deluxe. Settings?

[SyPheR]

I know a lot of people have this setup but somehow it's kinda strange. I can't find any review of someone with the BEST price/oc quality E6600 CPU with a P5W DH Deluxe. It's allways the E6700 while this cpu has less overclock capabilities when compared with the E6600. The E6600 has been able to run at 4 Ghz with aircooling. My dad is going to buy a E6600 with P5W DH Deluxe and GEIL DRR2-800 CL4-4-4-12 memory and an Antec P150 case etc but question is what must I do within the bios to make it run stable @ 3Ghz. Any experts? Thx for your help.

 

[exarrkun]

just read wusy's overclocking guide at the top of this forum
with these components you will hit 3ghz with great ease

good luck!

 

[SyPheR]

yes thx true.....Wusy really ownz. But I have some question.......somehow it's like everyone wants to overclock to 3 ghz and more but one think that I don't understand is that when I do it it's like I have some jet engine standing next to me making a lot of noise when the fan of the Artic Cooling Freezer Pro 7 starts to speed up to 2600 and more rpm. When I don't overlock I have problems in telling weather the system is running or if it's turned off.
In other words......why are many fans not supported in the Asus P5W DH Deluxe? Is it too hard to support rpm control for more then stock only cooling (from which I read some people are complaining too with the same problems)? I connected the fan power to the 4 cpu fan connector.

 

[forumtroll]

Honestly... I really doubt 3 ghz is going to be pushing a high load temp. I really doubt that your cpu controlled fan will be running fast with a 3 ghz oc on the 6600.

 

[SyPheR]

Honestly... I really doubt 3 ghz is going to be pushing a high load temp. I really doubt that your cpu controlled fan will be running fast with a 3 ghz oc on the 6600.

Well, I use Core Temp and check the temps...they are perfectly fine around 45 degrees idle....I mean please explain why the fan needs to be running at 2600 rmp. It's not nessecary I agree. I was also like "WHAT IS HAPPENING"...the setup bought is perfect for overclocking.