Rate my build V2.0

[bsgray34]

Ok guys here we go again, i unloaded my 939 setup and went with this instead. I plan to overclock this system 500-1000 MHz.

Quick note about the PSU, i called and talked to eVga's tech support and gave them the ratings on my psu and told them that i would be oc'ing this system, and they said i was fine. The psu calculator tells me i should be fine as well.

Here is my setup.


Enermax Noisetaker 2 485w - 2x +12v @ 22A
Intel C2D - E6400 Processor
Zalman 9500 Cooler
GIGABYTE GA-965P-DS3 Motherboard
G.SKILL 2GB (2 x 1GB) 240-Pin SDRAM DDR2 800 Rated @ 4-4-4-12
eVGA 640-P2-N821-AR GeForce 8800GTS
Western Digital Caviar SE16 320GB 7200 RPM SATA HDD



Anything look totally off? Any suggestions? Thanks.

 

[haywood]

Looks good. See mpilchfamily's sticky in the power supply forum. The PSU is probably fine but there are better out there.

 

[bsgray34]

Switched to the Zalman 9500 Cooler. Any other tips?

 

[outlw6669]

Go for the ASUS P5B Delux.
It will overclock better.

Also get a better cooler.
If you like zalmain go with the 9700.
If not go with a scythe ninja or a turnic tower.

And yes, there are mutch better psu's out there.

 

[bsgray34]

Go for the ASUS P5B Delux.
It will overclock better.

Also get a better cooler.
If you like zalmain go with the 9700.
If not go with a scythe ninja or a turnic tower.

And yes, there are mutch better psu's out there.

Better psu's as in, mine isn't sufficient or better as in quality?