P5N32-SLI Premium - No post / continuous beep

Hi Everyone,

I hope you can help out... I recently built a new system with the following components:

P5N32-SLI Premium
Intel E6600
(2) Corsair 6400 1G sticks
EVGA 8800GTS

The problem is that the system will not POST. Instead I get a loud continuous beep (or siren).

To this point, I have swapped out my powersupply and mobo (tried a ASUS p5n32-SLI SE Deluxe the first time) and neither have made a difference. I tried removing all components and used only one stick of ram. No go.

I haven't tried assebling outside the case, but I was really hoping to avoid that!

Any ideas? Thanks in advance!!
2 answers Last reply
More about p5n32 premium post continuous beep
  1. UPDATE: OK - I got busy and pulled everything from the case... Mobo, (1 stick) ram, Video card and that is it... Running it on a non-conductive surface. Still same issues.

    Any ideas?
  2. Just figured it out.... You have to power the video card. Jeez.
Ask a new question

Read More

Asus SLI Components Motherboards