Speedtouch 510 Modem & Linksys WRT54GX Router

Archived from groups: alt.comp.periphs.webcam (More info?)

Hi All,

I hope that someone can help me. I'm desperate at this time.
I can't get my Linksys WVC54G Camera over IP working. Does
someone kow how to do this.
If I use the internal network everything is OK. Whe I try to
reach the Camera through the Internet I can not approach it
......... Who ca help me with the settings.

Thanks,
Greetings,

Ron Mostaard

Archived from groups: alt.comp.periphs.webcam (More info?)

Hi Noël,

Those settings are already OK....
It still won't work ......

--
Ron Mostaard
Globeplein 30
Almere - Buiten
The Netherlands

Tel. +31 (0)36 53 72 901
Fax +31 (0)36 53 27 299
Cell +31 (0)6 54 623 137
"Noël®" <n03l@_no_place_like_home_hotmail.com> schreef in
bericht newsf9djh$av9$1@news.cistron.nl...
>
> "Ron Mostaard" <flevoron@wxs.nl> wrote in message
> news:4317f027$0$19743$ba620dc5@text.nova.planet.nl...
>> Hi All,
>>
>> I hope that someone can help me. I'm desperate at this
>> time. I can't get my Linksys WVC54G Camera over IP
>> working. Does someone kow how to do this.
>> If I use the internal network everything is OK. Whe I try
>> to reach the Camera through the Internet I can not
>> approach it ........ Who ca help me with the settings.
>>
>> Thanks,
>> Greetings,
>>
>> Ron Mostaard
>
> Ron, you will need to logon to the Speedtouch510 and setup
> a NAPT
> Go to http://10.0.0.138 and login
>
> Now select Advanced > NAPT and click on New
> Leave Protocol as it (TCP)
> Inside IP is the LAN IP of the webcam
> Leave outside IP: 0.0.0.0
> I'm not sure what your inside port is, but as you can
> access it, you will know. Use that for the Inside and
> Outside port.
> Click on Apply, and Save all (left top)
>
> Good luck,
>
> Noël
>
> --
> http://webcam.kijk.info
> http://www.resize2mail.com
>
>

Archived from groups: alt.comp.periphs.webcam (More info?)

Said he has WRT54GX Router

He needs to pass real IP to it from the modem

Sounds like he needs the router in bridge mode.

"Noël®" <n03l@_no_place_like_home_hotmail.com> wrote in message
newsf9djh$av9$1@news.cistron.nl...
>
> "Ron Mostaard" <flevoron@wxs.nl> wrote in message
> news:4317f027$0$19743$ba620dc5@text.nova.planet.nl...
>> Hi All,
>>
>> I hope that someone can help me. I'm desperate at this time. I can't get
>> my Linksys WVC54G Camera over IP working. Does someone kow how to do
>> this.
>> If I use the internal network everything is OK. Whe I try to reach the
>> Camera through the Internet I can not approach it ........ Who ca help me
>> with the settings.
>>
>> Thanks,
>> Greetings,
>>
>> Ron Mostaard
>
> Ron, you will need to logon to the Speedtouch510 and setup a NAPT
> Go to http://10.0.0.138 and login
>
> Now select Advanced > NAPT and click on New
> Leave Protocol as it (TCP)
> Inside IP is the LAN IP of the webcam
> Leave outside IP: 0.0.0.0
> I'm not sure what your inside port is, but as you can access it, you will
> know. Use that for the Inside and Outside port.
> Click on Apply, and Save all (left top)
>
> Good luck,
>
> Noël
>
> --
> http://webcam.kijk.info
> http://www.resize2mail.com
>
>