put the cpu back in its socket and run a couple cpu intensive apps so the thermalpaste warms up. Turn off the computer and gently twist the heatsink off. If you just have the cpu i would take a putty knife or something, hold the cpu by its heat sink, and pry the cpu off. As long as you go slow you shouldnt have to worry about breakage.
yea, i pulled it out of a junk computer i found in the trash. how hot do you think something like this ran, cuz i was thinking if i found another way to heat it up i might be able to get it apart somehow
The ways that apt403 explained sound like a great idea. I think heating up the CPU in a motherboard first would be the best way. Less of a chance to break the pins.
Judging by the Heatsink and pin config, I would venture a guess that it is a P-133.
IF you have a motherboard for it, put it in the board and slowly heat up the Heatsink. Twisting it but not with a lot of force. Those Heatsinks back then used a thermal glue type of compound that should become pliable with a little bit of heat applied.
Let us know for sure when you get the Heatsink off. Unless my memory is failing me, I don't remember 486s having the 2 colored bottom like that. But only you will know for sure once you get it off.
I was about to write a response as I had a 486 DX2 -66 arround here that I just found again. Low and behold it's a dual colored bottom. I stand corrected. LOL