Sign in with
Sign up | Sign in
Your question

How to overclock P4 2.4 Ghz onIntel 865GBF?

Last response: in Overclocking
Share
January 13, 2007 9:43:38 AM

Hello All Of U!

I have a p4 with specs:

Processor: 2.4 Ghz
Mobo: Intel 865 GBF
Ram: 256 MB
Harddisk: 80 GB Sata (Seagate)

My computer is running very slow.It is taking hell of a time to load window xp. Please suggest some measure to make it faster.

Well, I want to overclock my processor, how can I do it. Please explain as I am beginner.

Thanx alot in advance!
January 14, 2007 7:21:09 AM

Definetely, as mpilchfamily said, get more RAM! Anything under 512MB with XP is asking for slowness. :wink: Also, have you defragged the hard drive lately? GL :) 
January 15, 2007 7:02:26 AM

Yes I have defragmented the hard drive, but still no good.

Well guys I m shot of money , cant upgrade abit.

Any recommendations on present setup will be appreciated.

Please tell me about overclocking my processor as well.

Thanx
Related resources
January 15, 2007 10:14:35 AM

Well,

Please tell me if I can over-clock my processor or not, on my current mobo.


If yes, Plzzzzzzzzzzzzz explain.


Just tell how can I increase the FSB on my D865GBF mobo.

Tell me if Intel Integrator Toolkit Will help me or not.


Thnx.
January 15, 2007 11:01:58 AM

I used to have that same series of motherboard and it does not allow overclocking. They are locked. Well, it will allow a 10% overclock which will do no good. As other posters have said, you NEED more RAM. A 256 stick is around $25 and the best money you will ever spend on this computer if you want to keep it going.
January 15, 2007 12:46:27 PM

Can I know how did u achieve that 10% over-clocking horstmann, :?:


I will appreciate it.

Plzzzz explain the process.


Thnx to all for ur help.
January 15, 2007 4:02:27 PM

If you have the right board, you can overclock using this utility from intel.

control center

Give it a try.
January 16, 2007 4:44:41 AM

Hello


I have got a D865G chipset while this software is for D865p chipset., so the software is useless for me.

Any other suggestions :!:
January 16, 2007 5:49:48 AM

wow you are slow..


overclocking will do NOTHING with only 256 mb of ram.

ARE YOU LISTENING ....................... NOTHING .....................................................................................................................................................GET MORE RAM.......................................................


pony up the 30$ and buy a stick of ram. Your just wasting your time, along with alot of other peoples time.







GET MORE RAM......
January 16, 2007 10:10:05 AM

I went home and looked in my bios and I was mistaken. The Intel board that I have is a 865 PERL which will let me overclock to 4%. You have to go into the bios and go to the Advanced tab. There will be something called chipset configuration or something close. You can change one of the settings in there from auto to -2% all the way up to +4%. It is basically good for nothing. If you change it to +4% your chip will run at 2.5Ghz.

This computer that I have is basically the same as yours with one exception:
Processor: 2.4 Ghz
MB: Intel 865 PERL
Ram: 1 GB This makes my computer run pretty decent for how old it is
Video: Radeon 9700

Anyways, hope this is the info you were looking for and sorry but I don't think it will help.
!