Archived from groups: microsoft.public.pocketpc (More info?)
Thanks
"Beverly Howard [Ms-MVP/MobileDev]" <BevNoSpamBevHoward.com> wrote in
message news:%23DspNLiRFHA.3684@TK2MSFTNGP10.phx.gbl...
> >> Can anyone tell me how to figure out the difference on these and how
> to find out which version of software I should download. <<
>
> Depends on which device you have.
>
> All PPC devices produced since 2002 will run ARM software
>
> Beverly Howard [MS MVP-Mobile Devices]
Archived from groups: microsoft.public.pocketpc (More info?)
lars wrote:
> Can anyone tell me how to figure out the difference on these and how to find
> out which version of software I should download.
If you have an old Casio, it's probably MIPS. If a Jornada, SH3. Most
everything else = ARM of some flavour. It's the processor type, and you
may find yours under Start | Settings | System | About - thought it may
also say 'PXA255' or something... another sort of ARM.
Archived from groups: microsoft.public.pocketpc (More info?)
Unfortunately, there are several new processors which don't id
themselves in any way as "ARM" although they have the ARM subset so they
are fully "ARM Compatible"
A better approach would be to check for "mips" or "sh3" and if it's not,
assume that it's "ARM" There should be no significant danger in any
case, as trying to install a cab for the wrong processor will normally
fail immediately with a notice that cab is incompatible with the device.
Archived from groups: microsoft.public.pocketpc (More info?)
On Fri, 22 Apr 2005 20:59:25 -0500, "Beverly Howard
[Ms-MVP/MobileDev]" <BevNoSpamBevHoward.com> wrote:
>Unfortunately, there are several new processors which don't id
>themselves in any way as "ARM" although they have the ARM subset so they
>are fully "ARM Compatible"
>
>A better approach would be to check for "mips" or "sh3" and if it's not,
>assume that it's "ARM" There should be no significant danger in any
>case, as trying to install a cab for the wrong processor will normally
>fail immediately with a notice that cab is incompatible with the device.
>
>If the device was mfg since 2002, it's arm ;-)
nitpick
If it is a Pocket PC 2002 or Pocket PC 2003 (or probably the next
version of Pocket PC), it is an ARM-compatible. As per the definition
of these platforms from Microsoft. But some companies _do_ still make
computers that run Windows CE on other CPUs. They are mostly
(entirely?) industrial devices, including rugged handhelds.
>
>Beverly Howard [MS MVP-Mobile Devices]
-----------------------------------------
To reply to me, remove the underscores (_) from my email address (and please indicate which newsgroup and message).
Robert E. Zaret, eMVP
PenFact, Inc.
500 Harrison Ave., Suite 3R
Boston, MA 02118
www.penfact.com
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.