Problem OC e6300 on msi 975x

[srgess]

I set my ram timing and 2.1 volt that my ram required ( OCZ EL Platium XTC 1G kit ) I set my CPu Volt at 1.36 in the bios, i tryed the fsb at 333 everything looking good but when i restarted my computer it shutdown and needed to reset bios. My board is the msi 975x Platium Power up edition, anyone have it and passed 333 fsb or can tell what is the issue.

 

[Mondoman]

You need to experiment. You can't just set lots of different voltages and speeds/timings at once. Make a small adjustment to one item at a time, reboot, and test the stability (using something like memtest86+ and later Orthos).

 

[srgess]

Ive tried everything, stable at 315 withou problem but more then that, it reboot, shutdown when i quit windows for a restart. I changed my power supply for a 500W, 34amp. Im sure its not my ram because i am putting them at 1:1 at ex: 320fsb for a 320mhz ram running, but right not i putted the fsb at 291 with a ratio of 1:15( dont remmember ) not ram are running at 363mhz, i tryed to setup diff. speed timing on the ram , doesnt change anything. Beside the power supply, ram, what it could be ? The board ? Bios Update ? And voltage at 320 i went to 1.36v in the bios, i stopped there because i saw 3.0ghz and more with this voltage.