tuniq tower and thermaltake armor

[tommyboyo]

Hi guys, I'm speccing up some stuff, just have a quick question:

Will the Tuniq Tower fit in the Thermaltake VA8003SWA edition with the additional 25cm side mounted fan? I have heard its a massive case, but I'm thinking the width might be prohibitive for the TT installation due to the big side fan.

Anyone?

 

[Guest]

Case: 22.1" x 8.7" x 20.9" ; 8.7" = 22cm

You need 15.5cm, the case is 22cm wide, unles the fan is 5+cm thick, no issue whatsoever

 

[Felopian_Turtle]

Case: 22.1" x 8.7" x 20.9" ; 8.7" = 22cm

You need 15.5cm, the case is 22cm wide, unles the fan is 5+cm thick, no issue whatsoever

that pic would make a great sticky here. Just tried putting a tuniq inside an nzxt zero, looked great except for the bulge on the side of the case. had to remove two of the fans to make it happen

 

[Raence]

It will fit, sadly the side fan will basically rest against the tuniq tower when you close it.

 

[tommyboyo]

thanks for the replies, sounds like it'll be a bit snug in the Armor. Do you think the CM stacker 830 would be a better option?

 

[hybrid11]

i got the armor w/ the side fan and the scythe infinity which is 16cm in height, it fits just right, there's like half to a cm between the side fan and the top of the heatsink, so I think you'll be fine with the TT since its 15.5 cm in height.
You can always take out the side fan and mount it on the outside...
check this link out it will give you an idea of what it looks like http://www.xtremesystems.org/forums/showthread.php?t=127805