IPAQ 2210 Expansion Extension Cable

Archived from groups: microsoft.public.pocketpc (More info?)

If you need to Synch from an extended distance, you might try a USB
Bluetooth adapter for the PC and synch using Bluetooth.

Ron S.

"den" <nospden44105@yahoo.co.uk> wrote in message
news:cb8ee.359$996.173@newsfe6-gui.ntli.net...
> Hi
>
> Does anyone know of an extension cable for the expansion port on the
> bottom of the Ipaq2210?
>
> Something that will plug into say the cradle and then plug into the
> expansion port of the Ipaq for example.
>
> Thanks
>
> (remove "nosp" from email)
>

Archived from groups: microsoft.public.pocketpc (More info?)

Hi

I actualy just need the plug and socket parts.
My ipaq is in a case which is designed to allow the ipaq to plug into the
cradle still allowing it to sync/charge when connected to the computer.
I have a car holder with a built in gps so my ipaq just slots into but i
still have to take it out of the case. I am looking at moving the slot on
the gps forward slightly so allow more room for the ipaq while still in its
case.
So I was going to build a little "platform" that would plug into the gps
unit with a new plug on the platform in a slightly forward position. The
ipaq would sit slightly higher but there is room for this. So my ipaq would
plug into the "platform" which is plugged into the gps/car holder.

(Does any of this make sense)

Den

"Sven" <sejohannsen@hotmail.com> wrote in message
news:e4dR$E4UFHA.1796@TK2MSFTNGP15.phx.gbl...
> I've never seen anything like that for any PPC. I can only think of one
> good reason for it though and that is to attach a direct connect keyboard
> with a little more flexibility. Anything else, syncing via USB or Serial,
> attaching GPSs, etc. are all possible with cables designed for that. What
> were you planning to do with the extension cable?
>
> --
> Sven
> MVP - Mobile Devices
> "den" <nospden44105@yahoo.co.uk> wrote in message
> news:cb8ee.359$996.173@newsfe6-gui.ntli.net...
>> Hi
>>
>> Does anyone know of an extension cable for the expansion port on the
>> bottom of the Ipaq2210?
>>
>> Something that will plug into say the cradle and then plug into the
>> expansion port of the Ipaq for example.
>>
>> Thanks
>>
>> (remove "nosp" from email)
>>
>
>