Evga 680i and Scythe Infinity Tags: Heatsinks EVGA CPUs Overclocking Last response: February 8, 2007 4:09 AM in Overclocking Share intellectualpwer February 7, 2007 11:36:36 PM Hi, I was wondering if it is possible to install the scythe infinity on the 680i. The distance between the cpu and the northbridge seems really close. Does anyone have this combination or know if it works? More about : evga 680i scythe infinity PCAnalyst February 8, 2007 12:10:41 AM Don't think so... I had to revert back to the stock cooler on my eVGA 680i board. That pesky little northbridge doesn't allow much room. intellectualpwer February 8, 2007 4:09:06 AM Ok, i think that the scythe infinity can fit because it can be mounted both ways. Good luck on your watercooling PCAnalyst. Can't find your answer ? Ask ! Publish Related resources Scythe Infinity on Abit KN9... mounting direction. Forum Scythe Infinity, any experience? Forum Q6600 stuck under 3.4Ghz with Scythe Infinity Forum IP35-E and Scythe Infinity? Another fitting question Forum Scythe Infinity on Asus boards with Stack Cool 2? Forum Scythe Infinity Mods Forum Supporting the Weight of the Scythe Infinity Forum Scythe Infinity & Gigabyte DS3 Forum Motherboard that fits Scythe Infinity Forum BadAxe2 & Scythe Infinity fit in Lian-Li V1200? Forum Scythe Infinity cpu cooler case Suggestions>? Forum Scythe Ninja Plus or Infinity Forum thermalright ultra 120 or scythe ninja infinity ? Forum Will the Scythe Infinity fit @ a Asus Striker Extreme? Forum question over scythe infinity Forum Change Hyper6+ with Noctua NH-U12F/Scythe Infinity? Forum my review of the scythe infinity Forum Scythe Infinity with 4 fans Forum Scythe Infinity vs Tuniq Tower 120 Forum Scythe Infinity and No change in temp Forum More resources Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !