Cant get drive to work?

[racinj]

So my prevous post was converting an AMD to Intel. I am using
Mainboard : DFI Corp,LTD (LP NF4 Series)
Chipset : nVidia nForce4
Processor : AMD Athlon 64 4000+ @ 2400 MHz
Physical Memory : 1024 MB (2 x 512 DDR-SDRAM )
Video Card : Nvidia Corp GeForce 7800 GT
Hard Disk : WDC (37 GB) new raptor
Hard Disk : NVIDIA (320 GB) raid 1
DVD-Rom Drive : LITE-ON DVD SOHD-16P9S
DVD-Rom Drive : LITE-ON DVDRW SOHW-1693S
Operating System : Microsoft Windows XP Professionnal 5.01.2600 Service Pack 2
DirectX : Version 9.0c
As you can see system summary sees the WD Raptor 37G but in my computer it will not show, so I am having a hell of a time trying to figure out how transfer from 320 raid 1 to the raptor to start my rebuild.

Any Insight would be great, Thanks in advance.

 

[1Tanker]

So my prevous post was converting an AMD to Intel. I am using
Mainboard : DFI Corp,LTD (LP NF4 Series)
Chipset : nVidia nForce4
Processor : AMD Athlon 64 4000+ @ 2400 MHz
Physical Memory : 1024 MB (2 x 512 DDR-SDRAM )
Video Card : Nvidia Corp GeForce 7800 GT
Hard Disk : WDC (37 GB) new raptor
Hard Disk : NVIDIA (320 GB) raid 1
DVD-Rom Drive : LITE-ON DVD SOHD-16P9S
DVD-Rom Drive : LITE-ON DVDRW SOHW-1693S
Operating System : Microsoft Windows XP Professionnal 5.01.2600 Service Pack 2
DirectX : Version 9.0c
As you can see system summary sees the WD Raptor 37G but in my computer it will not show, so I am having a hell of a time trying to figure out how transfer from 320 raid 1 to the raptor to start my rebuild.

Any Insight would be great, Thanks in advance.

Did you try going into MyComputer\Manage\Disk Management\Action\Rescan Disks? GL

 

[PC_Side_Line]

ur intel should have had a cd with chipset drivers

did u remember to load in that intel cd after the build and boot up and all its new drivers?