Anybody use a Dvico Fusion III to record Svideo?

Archived from groups: alt.tv.tech.hdtv (More info?)

Is there a way to schedule when to record svideo input? The scheduler
appears to only let you select a *channel* as the input, which isn't what I
want. I am guessing there is some way to schedule svideo recording, I just
havent found it yet.

I am using the factory software, but I might try GotTV.

Any tips are greatly appreciated.

Thanks,
--Dan

Archived from groups: alt.tv.tech.hdtv (More info?)

Wierd, I definitely don't have that option. All I see are the channels
listed from Auto Scan. Hmmm...

Thanks!
--Dan


"Andy" <1@2.3> wrote in message
news:45nqh0pe9qhv7nvo70jg110tbk5bpd7bda@4ax.com...
> I see Composite and S-Video in the Channel drop-down box. This is for
> FusionHDTV II.
>
> On Fri, 13 Aug 2004 18:23:24 GMT, "dg" <dan_gus@hotmail.com> wrote:
>
> >Is there a way to schedule when to record svideo input? The scheduler
> >appears to only let you select a *channel* as the input, which isn't what
I
> >want. I am guessing there is some way to schedule svideo recording, I
just
> >havent found it yet.
> >
> >I am using the factory software, but I might try GotTV.
> >
> >Any tips are greatly appreciated.
> >
> >Thanks,
> >--Dan
> >
>

Archived from groups: alt.tv.tech.hdtv (More info?)

Wow, I am going to check a couple things and definitely ask you another
question or two. I am thinking I may need to run auto-scan on channels with
the svideo input active? Maybe because there was nothing there when I did
an autoscan, it doesn't show up on the list? Anyway, I will check my driver
version and post back. I thank you for your input!

--Dan

"Richard R" <jwerir@wideopenwest.com> wrote in message
news:u4qdnRf6abWb5YLcRVn-sA@wideopenwest.com...
> I have the fusion III atsc/qam card with version 2.69.07 drivers. The
> recording scheduler list my ntsc, 8vsb and s-video inputs when the antenna
> input is selected.
>
> Richard R.
>
> "dg" <dan_gus@hotmail.com> wrote in message
> news:wG7Tc.3353$QJ3.945@newssvr21.news.prodigy.com...
> > Is there a way to schedule when to record svideo input? The scheduler
> > appears to only let you select a *channel* as the input, which isn't
what
> I
> > want. I am guessing there is some way to schedule svideo recording, I
> just
> > havent found it yet.
> >
> > I am using the factory software, but I might try GotTV.
> >
> > Any tips are greatly appreciated.
> >
> > Thanks,
> > --Dan
> >
> >
>
>