Restore to different or dissimilar hardware. Possible?

Archived from groups: microsoft.public.win2000.setup (More info?)

Can anyone give me some insight on this?

I have been repeatedly told by our backup software vendor
(who shall remain nameless) that it is not possible to do
a full system restore to different hardware.

There are numerous KB articles out there that reference
this issue but none that provides a definitive answer.

Many articles refer to the "keysnottorestore" entry in the
registry. My understanding is that, based on this key,
one should be able to do a full restore of the
System_State and still be able to boot the system because
plug and play is still allowed to do its job.

However, I haven't been able to nail down an answer.

Does Microsoft have a position on this or what has been
your experience?

Thanks in advance for any response.

Ben

Archived from groups: microsoft.public.win2000.setup (More info?)

Greetings --

Normally, unless the new motherboard is virtually identical to the
old one (same chipset, IDE controllers, etc), you'll most likely need
to perform a repair (a.k.a. in-place upgrade) installation, at the
very least (and don't forget to reinstall any service packs and
subsequent hot fixes):

How to Perform an In-Place Upgrade of Windows 2000
http://support.microsoft.com/defau [...] us;Q292175

What an In-Place Win2K Upgrade Changes and What It Doesn't
http://support.microsoft.com/defau [...] us;Q306952

If that fails:

How to Move a Windows 2000 Installation to Different Hardware
http://support.microsoft.com/defau [...] US;Q249694


Bruce Chambers
--
Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

You can have peace. Or you can have freedom. Don't ever count on
having both at once. - RAH


"Ben Rodman" <mojomagix@yahoo.com> wrote in message
news:2226201c45cb3$d82e9790$a501280a@phx.gbl...
> Can anyone give me some insight on this?
>
> I have been repeatedly told by our backup software vendor
> (who shall remain nameless) that it is not possible to do
> a full system restore to different hardware.
>
> There are numerous KB articles out there that reference
> this issue but none that provides a definitive answer.
>
> Many articles refer to the "keysnottorestore" entry in the
> registry. My understanding is that, based on this key,
> one should be able to do a full restore of the
> System_State and still be able to boot the system because
> plug and play is still allowed to do its job.
>
> However, I haven't been able to nail down an answer.
>
> Does Microsoft have a position on this or what has been
> your experience?
>
> Thanks in advance for any response.
>
> Ben
>